Shop

Description

BMW E36 Control Arm Pocket Repair Part

This E36 control arm pocket is a heavy-duty repair and reinforcement kit for the mounting point of the rear control arm on the BMW E36. As an E36 control arm mount repair, it restores a damaged mount and prevents new damage. In addition, the pocket is made larger than the original, so you can adjust the rear toe over a much wider range.

The kit is intended for demanding users and serious E36 projects that serve as a base for motorsport. We advise welding it in during a build or a rear axle overhaul, when everything is apart anyway.

Key benefits of this E36 control arm mount repair part

• Restores and reinforces the mount of the rear control arm
• Larger pocket for a wider toe adjustment range
• Useful on a heavily lowered car or a set-up for maximum grip
• Template included to determine the exact position beforehand
• Made of 3 mm thick S355 steel
• Laser-cut and bent on CNC press brakes
• Weight: 4.1 kg

Suitable for

BMW 3 Series E36

• BMW E36 with a worn or cracked rear control arm mount
• Lowered E36 projects that need more toe adjustment
• Drift and track cars based on the E36

Technical specifications

• Item number: 0232
• Application: repair and reinforcement of the rear control arm mount
• Material: S355 steel
• Thickness: 3 mm
• Production: laser-cut, bent on CNC press brakes
• Installation: welded in
• Included: template for determining the position
• Weight: 4.1 kg

Installation and delivery

Because the pocket is larger than the original one, part of the body has to be cut away for this E36 control arm mount repair. A template is included for this. You place it against the body and drill a few holes through it as reference points, before you start cutting. If the drilled holes line up with the holes in the reinforcement, the E36 control arm pocket is in the right position for welding.

Welding in the E36 control arm mount repair is a job for an experienced welder. Work the same way on the left and the right so that both sides are identical, and treat the welds against rust afterwards. Always have the rear axle alignment reset after installation.

Also take a look at our other chassis and subframe reinforcements. If you are looking for a reinforcement without extra adjustment range, have a look at the E36 rear control arm mount reinforcement.

Stronger panels and more toe adjustment, in one job on the rear axle.

Why choose an E36 control arm mount repair part?

On an E36 that sits low or is driven hard, the rear control arm mount takes a lot of punishment and the standard toe adjustment range is often too small. This E36 control arm mount repair tackles both problems: the mount is restored and reinforced, and you get the room to adjust the rear axle precisely. With the supplied template, you can be sure that the pocket ends up in the right place.

Frequently asked questions

Why does the body have to be cut?

The E36 control arm pocket is larger than the original. To make it fit, part of the body has to be cut away.

How do I determine the correct position?

With the supplied template. You drill a few reference holes through it. If they line up with the holes in the reinforcement, it is in the right place.

What does the extra adjustment range give me?

You can adjust the rear toe further. That is especially useful on a heavily lowered car or a set-up for maximum grip.

Can I bolt the pocket on?

No, this E36 control arm mount repair part is installed by welding it in.

When is the best time to fit this kit?

Fit the E36 control arm mount repair during a build or a rear axle overhaul, when the control arms have been removed anyway.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.