Description
BMW E36 Anti-Roll Bar Brackets Rear, Set of 2
With these E36 anti-roll bar brackets for the rear, you replace the mounts to which the drop links of the rear anti-roll bar are attached. On an older BMW E36 these original mounts are a weak spot: anyone who tries to undo a seized bolt often ends up holding a torn-off bracket.
The set consists of two brackets made of 4 mm thick S355 steel, complete with a bolt that has the same specifications as the original. A good choice for powerful motorsport cars with a thicker anti-roll bar, but also for an E36 that is driven every day and has suffered from weather and road salt.
Contents
Key benefits of these E36 anti-roll bar brackets for the rear
- Stronger than the original: 4 mm thick S355 steel
- Bolt included, with the same specifications as the original
- Solves the tearing-off when undoing seized bolts
- Suitable for thicker anti-roll bars and lots of power
- Also for daily use in rain and road salt
- Supplied as a pair, for left and right
Suitable for
BMW 3 Series E36, rear axle
- BMW 3 Series E36, mounting of the rear drop links
- E36 drift and track cars with a heavier anti-roll bar
- Daily-driven E36s with rusted or broken brackets
Technical specifications
- Item number: 0173
- Application: drop link bracket, rear anti-roll bar
- Material: S355 sheet steel
- Thickness: 4 mm
- Bolt: specification identical to the original
- Contents: 2 brackets (one pair)
- Weight: 0.1 kg
Installation and delivery
The E36 anti-roll bar brackets for the rear take the place of the original drop link mounts. First remove the remains of the old bracket and clean the panel thoroughly. Exactly how the new bracket is fixed depends on the condition of your car; have this done by a mechanic with experience in panel work and welding.
Treat the bare metal against rust after the repair and fix the drop link with the supplied bolt. A little copper grease on the thread helps prevent the same problem next time. Replace both sides at the same time, so that the anti-roll bar is loaded equally on the left and right.
You will find all anti-roll bar parts in the anti-roll bars category, and more reinforcements in chassis and subframe reinforcements. For the front axle there is the set of E30 E36 front anti-roll bar brackets.
Exactly where the original mount gives up, there is now 4 mm of steel.
Why choose these E36 anti-roll bar brackets for the rear?
On many E36s the bolts of the rear drop links are completely seized. When you undo them, the original mount often tears off with them. With these E36 anti-roll bar brackets made of 4 mm S355 steel you get a stronger replacement, including a bolt to the original specification. Ideal if you are already fitting new drop links or a thicker anti-roll bar.
A broken mount means that the anti-roll bar hangs loose on that side and the car reacts differently in corners. Anyone who regularly works under an E36 knows how often this happens. With a pair of these brackets on the shelf, you are prepared for the next time it goes wrong.
Frequently asked questions
How many brackets are in the set?
The E36 anti-roll bar brackets for the rear are supplied as a pair, one for the left and one for the right.
Is a bolt included?
Yes. The bolt has the same specifications as the original.
How thick is the steel?
4 mm, in S355 grade.
Are they also suitable for a road car?
Yes, especially for daily-driven cars that have to deal with a lot of moisture and road salt.
Do they also fit the E46?
No, this set of E36 anti-roll bar brackets is for the E36. For the E46 we have a separate set made of 3 mm steel.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.









Reviews
There are no reviews yet.