Shop

Description

BMW E30 E36 Z3 E46 Steering Angle Spacers, Set of 2

With these steering angle spacers you increase the maximum steering lock of the front wheels of your BMW E30, E36, E36 Compact, E46 or Z3. You fit the rings in the steering rack, after which you can steer with more angle in a drift while staying in control. Because fitting is quick and easy, this is one of the most popular first modifications to a drift car.

Anyone who starts drifting soon notices that the standard steering lock falls short: at a bigger angle you hit the stop and spin. These spacers give you just that little bit of extra room to catch the car.

Key benefits of these steering angle spacers

• Increased steering lock of the front wheels
• More angle in a controlled slide, especially for drifting
• Quick and easy to fit in the steering rack
• Set of 2: one spacer per side
• Each spacer is 4 mm thick: more lock while keeping a reliable steering system
• CNC-turned from steel

Suitable for

BMW 3 Series and Z3 with the corresponding steering rack

• BMW 3 Series E30
• BMW 3 Series E36 and E36 Compact
• BMW 3 Series E46
• BMW Z3 (E36)

Technical specifications

• Item number: 0052
• Application: steering rack, for more steering lock
• Contents: 2 spacers, one per side
• Thickness: 4 mm per spacer
• Material: steel, CNC-turned
• Weight: 0.1 kg

Installation and delivery

The steering angle spacers go in the steering rack, one on each side. Fitting is quick and easy, which is what makes this solution so popular. Do bear in mind that you need to be able to work on the steering rack: put the car safely on axle stands and take the time to dismantle and reassemble everything properly. If you have little experience with steering systems, have a mechanic do it.

After fitting, check the full steering range with the wheels off the ground. Check that the tyres, wheels and track rods do not touch the control arms, the body or the brake lines anywhere. Then have the wheel alignment checked, especially if parts of the steering system have been removed.

In our control arms and track rods category you will find more parts to build your BMW for drifting.

More steering lock means more room to save a drift instead of spinning.

Why choose these steering angle spacers?

A complete lock kit is a big investment. With these steering angle spacers you already get noticeably more lock for a small amount, without making the steering system unreliable. Ideal as a first step for a beginner drifter with an E30, E36, E46 or Z3, and also a smart addition to other front axle modifications.

Frequently asked questions

How many spacers are in the set?

Two, one for each side of the steering rack.

How thick are the steering angle spacers?

Each spacer is 4 mm thick. According to the manufacturer, that thickness gives more steering lock while the steering system stays reliable.

Which models do the steering angle spacers fit?

The BMW E30, E36, E36 Compact, E46 and the Z3.

Do I need a wheel alignment after fitting?

Yes, that is wise. After work on the steering system the settings may have changed, and with a good wheel alignment you get the most out of the extra angle.

Are the spacers also suitable for a road car?

They are primarily intended for drifting. On the road you will mainly notice a slightly smaller turning circle. Do make sure nothing rubs at full lock, because that applies on the road just as much as on the track.

Can anything rub at full lock?

That depends on your wheels, tyres and control arms. So always check the entire steering range after fitting.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.