Description
Front Strut Brace BMW E28 E24
This E28 E24 front strut bar for BMW is intended for the 5 Series E28 and the 6 Series E24. It fits all standard engine versions of these cars, with the exception of the 2.4d and 2.4td diesels and the engines from the M20 family. The brace keeps the two front strut towers at a fixed distance from each other.
The E28 and the E24 are popular classics among BMW enthusiasts, and quite a few are still actively driven or even used for drifting and club races. At that age and with that kind of use, extra stiffness at the front is no unnecessary luxury.
Contents
Key benefits of the E28 E24 front strut bar
- One brace for two classics: the 5 Series E28 and the 6 Series E24
- Straight steel profile, flat oval 40 x 20 mm with a 3 mm wall
- Round mounting plates, laser-cut and bent on a CNC press brake
- Pressed mounting holes for extra rigidity
- MIG/MAG-welded in jigs by a certified welder
- Tested in drift and rally
- Black powder coating that looks good with any colour
Suitable for
BMW 5 Series E28 and 6 Series E24
- BMW 5 Series E28, all standard engines
- BMW 6 Series E24, all standard engines
- Not suitable for: 2.4d, 2.4td and engines from the M20 series
Technical specifications
- Item number: 0011
- Position: front
- Main profile: flat oval steel, 40 x 20 mm
- Wall thickness: 3 mm
- Mounting plates: laser-cut, CNC-bent, holes pressed
- Welding method: MIG/MAG
- Finish: black powder-coated
- Weight: 2.84 kg
Installation and delivery
The round plates of the E28 E24 front strut bar are placed on top of the front strut towers and fixed there. Since these cars are well over thirty years old, it is wise to check the towers for rust and deformation first. Clean the surfaces, fit the brace, screw the bolts in loosely and then tighten them evenly.
Put the car on its wheels when tightening. For more stiffness, also take a look at the other strut braces in our range. If you drive a large BMW from a later generation, there is also, for example, a strut brace for the 5 Series E60 and E61.
A classic sharknose or E28 deserves a front end that is as tight as its lines.
Why choose this E28 E24 front strut bar?
Parts for the BMW E28 E24 are becoming increasingly hard to find, especially when it comes to suspension reinforcements. This E28 E24 front strut bar is specially matched to these two models, made of 3 mm steel and tested in motorsport. It gives an older body more cohesion at the front and looks neat under the bonnet.
Frequently asked questions
Does this brace fit an E28 with an M20 engine?
No. The E28 E24 front strut bar is not suitable for engines from the M20 series, nor for the 2.4d and 2.4td.
Does it fit the 6 Series E24?
Yes, the E28 E24 front strut bar is suitable for both the E28 and the E24 with standard engines.
What material is the brace made of?
Steel with a flat oval profile of 40 x 20 mm and a 3 mm wall.
How heavy is the brace?
The E28 E24 front strut bar weighs 2.84 kg.
Is the brace suitable for motorsport?
According to the manufacturer, it has been tested under tough conditions in competitions, including drift and rally.
Do I need to modify anything on the car to fit it?
No, the brace goes on top of the towers. On an older car, it is wise to first check whether the panel around the towers is still sound, so that the brace rests on a solid base.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.









Reviews
There are no reviews yet.