AST Multipoint Weld-in Roll Cage BMW E36 Sedan V5 NASCAR door

€1.601,98 Incl. VAT

AST Multipoint Weld-in Roll Cage BMW E36 Sedan V5 NASCAR door

This Multipoint Saloon V5 NASCAR is a full roll cage for the BMW E36 with 4-door saloon bodywork, the most comprehensive version in the range, permanently welded in at 10 points. The NASCAR door bars run alongside the driver in several planes and require modification of the door card. Unpainted weld-in kit from AST Roll Cages, 71 kg. Delivery time 15 to 35 working days.

Available on back-order|Estimated delivery time: 15 tot 35 werkdagen

SKU: CMBN06840 Category: Brand:

Description

AST Multipoint Weld-in Roll Cage BMW E36 Sedan V5 NASCAR door

The AST Multipoint Weld-in Roll Cage BMW E36 Saloon V5 NASCAR Door Bars is a full roll cage for the BMW E36 with 4-door saloon bodywork. This Multipoint Saloon V5 NASCAR version is the most comprehensive in the range and also features NASCAR-style door bars, permanently welded to the bodyshell at 10 points.

The cage is designed and built by AST Roll Cages in Spain, for the builder who starts at the top of the range and wants the driver’s side as heavy-duty as possible.

Key benefits

  • Most comprehensive version in the range, combined with NASCAR door bars
  • NASCAR door bars that run alongside the driver in several planes
  • Full roll cage spanning the entire interior
  • 10 welded mounting points for a permanent, fully integrated structure
  • Door bars, diagonals and harness bars from the lower versions are included
  • Unpainted weld-in kit weighing 71 kg, model-specific for the E36 saloon
  • Built to order by AST Roll Cages in Spain

Suitable for

BMW E36, 4-door saloon

  • BMW E36 4-door saloon
  • Type: multipoint weld-in roll cage with NASCAR door bars, version V5
  • Drifting, track use and rallying

Technical specifications

  • Manufacturer: AST Roll Cages
  • Manufacturer part number: CMBN06840
  • Sunroof: for roofs without a sunroof
  • Headlining: for roofs without headlining
  • Rear anchorage: in the rear suspension area
  • Rear structure layout: V design
  • Type: full roll cage, multipoint weld-in (permanent)
  • Configuration: most comprehensive version, with NASCAR door bars
  • Main hoop: E355 steel, 45 mm diameter
  • Secondary structure: E355 steel, 40 mm diameter
  • Foot plates: 3 mm steel, custom-designed for each car
  • Mounting: 10 welded mounting points on the bodyshell
  • Weight: 71 kg (manufacturer’s figure)
  • Finish: unpainted weld-in kit
  • Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that it fits your car exactly. This is the most involved build in the range: the interior has to be stripped out completely, and the NASCAR door bars almost always require modification of the door card as well.

The most heavy-duty version in the AST range for the E36 saloon, with NASCAR bars alongside the driver.

Why choose this Multipoint Saloon V5 NASCAR roll cage?

This is the end point of the range: the most comprehensive build, complemented by door bars that shield the driver in several planes. A car built for this is no longer a road car, and that is exactly the trade-off you make before you weld.

Frequently asked questions

Who is this version intended for?

The Multipoint Saloon V5 NASCAR is intended for a car that is being built entirely for the track. You get the most comprehensive structure in the range with the most heavy-duty form of side protection.

What do the NASCAR door bars mean for the interior?

The door card almost always has to be modified or replaced, because the bars run into the door opening in several planes. Getting in and out also works differently than with a standard door bar.

What exactly will I receive?

The weld-in kit with gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and a sticker set, all unpainted. This cage is intended for track and competition use; check with your own federation or sporting organisation which requirements apply in your class.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight71 kg
Car make

BMW

Model

E36

Reviews

There are no reviews yet.

Be the first to review “AST Multipoint Weld-in Roll Cage BMW E36 Sedan V5 NASCAR door”
EN

Your Shopping cart

Close