Sparco roll cage padding 50 mm | FIA 8857-2001 | 50 cm

€30,57 Incl. VAT

Sparco roll cage padding 50 mm

Fire-resistant roll cage padding from Sparco, homologated to FIA 8857-2001. 50 cm long and suitable for tubes with a 50 mm outside diameter. Only 65 grams per piece and fitted in a few minutes, even on a cage that is already in the car. The safety upgrade with the best balance between price and protection.

Available on back-order|Estimated delivery time: 4 to 7 days

SKU: 0076050 Category: Brand:

Description

Sparco roll cage padding 50 mm (50 cm, FIA 8857-2001)

Sparco roll cage padding 50 mm is the fire-resistant tube protection that completes your roll cage. Every tube you could hit with your helmet, shoulder or knee should be padded, and this is exactly the type of padding scrutineers look for.

The padding is made from fire-resistant foam with a tough outer layer and is homologated to FIA 8857-2001, the standard required at virtually every circuit and every drift event. You slide it over a 50 mm tube and secure it – that’s all you need.

At 65 grams per piece, it adds virtually no weight to your car. For drifters, track day drivers and rally drivers, this is one of the cheapest safety upgrades you can make.

Key benefits

  • FIA 8857-2001 homologated, accepted at scrutineering at home and abroad
  • Fire-resistant foam, keeps its shape in the heat
  • Extremely light, only 65 grams per piece
  • 50 cm long, enough for the critical zone next to your head
  • Can be cut to size with an ordinary knife
  • Fits 50 mm tubes, the most commonly used cage diameter
  • Made in Italy by Sparco, active in motorsport since 1977

Suitable for

Any roll cage or roll bar with tubes of 50 mm outside diameter

  • Drift cars with an approved or self-built cage
  • Track day and circuit cars
  • Rally and rallycross cars
  • Road cars with a roll bar in the back

Technical specifications

  • Manufacturer: Sparco
  • Part number: 0076050
  • EAN: 8033280058722
  • Homologation: FIA 8857-2001
  • Length: 50 cm
  • Suitable for tube diameter: 50 mm
  • Weight: 65 grams
  • Quantity: 1 piece
  • Country of origin: Italy

Fitting and delivery

Fitting takes less than five minutes. Slide the padding over the tube, or slit it open lengthways if the cage is already welded in, and secure it with cable ties or tape. If you want to cover several tubes, allow at least two pieces for the A-pillars and one piece for the cross tube above your head. Delivery time 4 to 7 days.

For the price of a tank of fuel, you buy the protection your head needs when things go wrong.

Why choose this roll cage padding?

There is plenty of cheap padding on the market that looks the same but carries no FIA label. At scrutineering you will be penalised for it, and in an impact that foam does nothing. Sparco supplies the real thing with the 8857-2001 homologation printed on it, and that is the difference between being allowed to start or not.

Frequently asked questions

Does this padding fit a 40 mm tube?

No, this version is made for tubes with an outside diameter of 50 mm. For thinner tubes, there is a separate 40 mm version.

Is one piece enough for my cage?

Usually not. Allow three to four pieces to cover the A-pillars and the cross tube above your head. Each piece is 50 cm long.

Is this padding FIA approved?

Yes, the Sparco roll cage padding 50 mm is homologated to FIA 8857-2001 and is accepted at scrutineering.

Can I make the padding shorter?

Yes, you can cut the foam to size with a sharp knife. Sparco itself also mentions this as an option.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight0,065 kg

Reviews

There are no reviews yet.

Be the first to review “Sparco roll cage padding 50 mm | FIA 8857-2001 | 50 cm”
EN

Your Shopping cart

Close