AST Multipoint Weld-in Roll Cage BMW E46 Touring V2

€1.111,19 Incl. VAT

AST Multipoint Weld-in Roll Cage BMW E46 Touring V2

This full roll cage for the BMW E46 Touring builds on the V1 and adds front reinforcement bars to the bulkhead. This incorporates the front section of the bodyshell into the structure and keeps the front axle more firmly in place. Ten welded mounting points, E355 steel and an unpainted weld-in kit with reinforcement plates and mounting hardware. Delivery time 15 to 35 working days.

Available on back-order|Estimated delivery time: 15 tot 35 werkdagen

SKU: CMBN06729 Category: Brand:

Description

AST Multipoint Weld-in Roll Cage BMW E46 Touring V2

The AST Multipoint Weld-in Roll Cage BMW E46 Touring V2 is a full roll cage for the BMW E46 with five-door Touring bodywork. This Multipoint E46 Touring V2 is the V1 supplemented with front reinforcement bars running through to the bulkhead, welded to the bodyshell at ten points.

The cage is designed and built by AST Roll Cages in Spain, for drivers who want to stiffen the front section of their E46 Touring, as that is where most torsion occurs when drifting and on track.

Key benefits

  • Front reinforcement bars to the bulkhead bring the front end into the structure, whereas the V1 stops at the main hoop.
  • Less torsion at the front, so the front axle maintains its geometry and the car remains more predictable.
  • Ten welded mounting points on the bodyshell, more than the eight of a standard weld-in cage.
  • E355 steel, 45 mm main hoop and 40 mm for the rest of the structure.
  • Gussets and reinforcement plates spread the load across the Touring’s thin sheet metal.
  • Unpainted weld-in kit with bolts, washers, nuts, documentation, fitting instructions and a sticker set.

Suitable for

BMW E46, 5-door Touring

  • BMW E46 Touring (five-door body)
  • Type: multipoint weld-in roll cage, version V2
  • Drifting, track use and rallying

Technical specifications

  • Manufacturer: AST Roll Cages
  • Manufacturer part number: CMBN06729
  • Sunroof: for roofs without a sunroof
  • Headlining: for roofs without headlining
  • Rear anchorage: in the rear suspension area
  • Rear structure layout: X design
  • Type: full roll cage, multipoint weld-in (permanent)
  • Main hoop: E355 steel, 45 mm diameter
  • Secondary structure: E355 steel, 40 mm diameter
  • Foot plates: 3 mm steel, custom-designed for each car
  • Mounting: 10 welded mounting points on the bodyshell
  • Weight: 71 kg (manufacturer’s figure)
  • Finish: unpainted weld-in kit
  • Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. Bear in mind that the front bars run all the way to the bulkhead, so plan the fitting before the dashboard and wiring go back into the car.

The V2 extends the multipoint cage all the way to the bulkhead, so that the front end of the E46 Touring also becomes part of the structure.

Why choose this Multipoint E46 Touring V2 roll cage?

AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that it fits your car exactly. For the front bars this matters even more: they have to pass existing grommets and connections and meet the bulkhead precisely. What you get is the rigidity of the V1 plus the part of the car where you feel it soonest.

Frequently asked questions

What does the V2 add compared with the V1?

The Multipoint E46 Touring V2 has the same main hoop and braces, but adds front reinforcement bars to the bulkhead. As a result, the front section of the bodyshell is also incorporated into the cage.

Will this cage really fit my Touring?

The cage is designed for the five-door Touring bodyshell of the E46. AST scans the bodyshell with laser scanners and designs the tubework in 3D, so that all welded mounting points and plates end up in exactly the right place.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight71 kg
Car make

BMW

Model

E46

Reviews

There are no reviews yet.

Be the first to review “AST Multipoint Weld-in Roll Cage BMW E46 Touring V2”
EN

Your Shopping cart

Close