Description
AST Multipoint Weld-in Roll Cage BMW E30 Sedan V4 NASCAR door
The AST Multipoint Weld-in Roll Cage BMW E30 Sedan V4 NASCAR Door Bars is a full roll cage for the rear-wheel-drive BMW E30 with 4-door saloon bodywork. This Multipoint E30 Sedan V4 NASCAR goes a step further than the V3 with an extra diagonal brace and a harness bar, while keeping the NASCAR door tubes in both doors.
The cage is designed and built by AST Roll Cages in Spain, for drivers who are getting their rear-wheel-drive E30 ready for competition and value a correctly positioned mounting point for their harness.
Key benefits
- The harness bar gives the shoulder straps of your harness a fixed mounting point at the right height.
- An extra diagonal brace increases torsional rigidity compared with the V3.
- Ten welded mounting points spread the load more widely than the standard weld-in version.
- NASCAR door bars with several curved tubes per door instead of the standard door bar.
- More side protection across a larger area of the door.
- More room to get in than with a straight door bar.
- Tailored to the rear-wheel-drive E30 saloon.
Suitable for
BMW E30 3 Series, 4-door saloon
- BMW E30 3 Series 4-door Saloon
- Rear-wheel-drive E30 only
- Type: multipoint weld-in roll cage, version V4 with NASCAR door bars
- Drifting, track use and rallying
Technical specifications
- Manufacturer: AST Roll Cages
- Manufacturer part number: CMBN03532
- Sunroof: for roofs without a sunroof
- Headlining: for roofs without headlining
- Rear anchorage: in the rear suspension area
- Rear structure layout: X design
- Type: full roll cage, multipoint weld-in (permanent)
- Main hoop: E355 steel, 45 mm diameter
- Secondary structure: E355 steel, 40 mm diameter
- Foot plates: 3 mm steel, custom-designed for each car
- Mounting: 10 welded mounting points
- Weight: 71 kg (manufacturer’s figure)
- Finish: unpainted weld-in kit
- Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set
Fitting and delivery
The cage is built to order; the standard delivery time is 15 to 35 working days. Agree the seat position with your welder beforehand, so that the harness bar ends up at the right height behind the seat. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that it fits your car exactly.
The V4 combines ten welded mounting points with a harness bar, so both your harness and your bodyshell are up to competition standard.
Why choose this Multipoint E30 Saloon V4 NASCAR roll cage?
Many drivers end up with the V4 as soon as they start using a proper four-point or six-point harness, because at that point you no longer want to anchor those straps to the bodyshell. Here you get the harness bar and the extra diagonal in a cage that is already welded in at ten points. At the same time, the NASCAR door bars keep the car practical for regular use on track.
Frequently asked questions
Why is a harness bar important?
The Multipoint E30 Sedan V4 NASCAR has a fixed bar to which you attach the shoulder straps, so they run at the correct angle instead of being anchored to a body panel.
Does this cage fit an all-wheel-drive E30?
No, this version has been designed for the rear-wheel-drive E30. There is a separate AWD version for the all-wheel-drive E30 (325iX).
How well does the cage fit the car?
AST scans the bodyshell with laser scanners and designs the cage in 3D on the basis of that scan, so that the weld-in kit fits the E30 saloon without any adjustment work. The cage is intended for track and competition use; check the regulations of your own organiser.
What is the delivery time?
The standard delivery time for this roll cage is 15 to 35 working days.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.