Description
AST Multipoint Weld-in Roll Cage BMW E30 Touring V1
The AST Multipoint Weld-in Roll Cage BMW E30 Touring V1 is a full roll cage for the BMW E30 with 5-door Touring bodywork. This Multipoint E30 Touring V1 is built for the rear-wheel-drive E30 Touring and, with its main hoop and backstays, marks the entry level of the multipoint range.
The cage is designed and built by AST Roll Cages in Spain, for drivers who are building up their Touring step by step and want to give the car a rigid foundation right from the start.
Key benefits
- Ten welded mounting points spread the forces over more areas of the bodyshell than a standard weld-in cage with eight welded mounting points.
- More rigid bodyshell, so the suspension responds more predictably and your set-up comes through more clearly.
- Heavy main hoop in E355 steel with a diameter of 45 mm, the core of the entire structure.
- Custom-made for each chassis, so welding and alignment don’t become guesswork.
- Complete weld-in kit with gussets, reinforcement plates and mounting hardware.
- Usable load space is preserved best at this entry level.
- Upgrade path to heavier versions within the same multipoint family.
- Choice of rear anchorage: in the rear suspension area or at the wheel arch; you specify this when ordering.
Suitable for
BMW E30 3 Series, 5-door Touring, rear-wheel drive
- BMW E30 3 Series 5-door Touring
- Only the rear-wheel-drive E30 Touring
- Type: multipoint weld-in roll cage, version V1
- Drifting, track use and rallying
Technical specifications
- Manufacturer: AST Roll Cages
- Manufacturer part number: CMBN06763
- Sunroof: for roofs without a sunroof
- Headlining: for roofs without headlining
- Rear structure layout: X design
- Type: full roll cage, multipoint weld-in (permanent)
- Main hoop: E355 steel, 45 mm diameter
- Secondary structure: E355 steel, 40 mm diameter
- Foot plates: 3 mm steel, custom-designed for each car
- Mounting: 10 welded mounting points on the bodyshell
- Weight: 71 kg (manufacturer’s figure)
- Finish: unpainted weld-in kit
- Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set
Fitting and delivery
The cage is built to order; the standard delivery time is 15 to 35 working days. Fitting is permanent and a job for an experienced welder: the interior comes out and the cage is welded to the bodyshell at ten points, after which it can still be painted or coated.
Ten welded mounting points instead of eight make the E30 Touring a noticeably more rigid car, even at entry level V1.
Why choose this Multipoint E30 Touring V1 roll cage?
AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that it fits your car exactly. That saves hours of trimming and cutting in the workshop. For the rear-wheel-drive E30 Touring, the result is a safety structure that keeps the load space as usable as possible while still significantly increasing torsional rigidity.
Frequently asked questions
What is the difference from a standard weld-in cage?
A standard weld-in cage has eight welded mounting points. The Multipoint E30 Touring V1 has ten, so the load is spread over more parts of the bodyshell and the car becomes more rigid.
What exactly will I receive?
You receive an unpainted weld-in kit with gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and a sticker set.
Where is the cage anchored at the rear?
You specify this when ordering: in the rear suspension area or at the wheel arch. AST builds the cage for the anchorage you choose.
What is the delivery time?
The standard delivery time for this roll cage is 15 to 35 working days.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.