Description
AST Bolt-in Roll Cage BMW E34 Sedan V3
The AST Bolt-in Roll Cage BMW E34 Saloon V3 is a full roll cage for the BMW 5 Series E34 with 4-door saloon bodywork. This Bolt-in E34 Saloon V3 has the front reinforcement bars of the V2 and adds door bars, bringing the sides of the car into the structure as well.
The cage is designed and built by AST Roll Cages in Spain, for drivers who want side protection in the cockpit as well as rigidity.
Key benefits
- Door bars: protection alongside the driver, exactly the area that takes the most punishment in a side hit.
- Front bars to the bulkhead: the front end stays tied to the main structure.
- E355 steel: main hoop with a diameter of 45 mm, other tubes 40 mm.
- Six welded foot plates in 3 mm steel, custom-designed for each car, onto which the cage is bolted.
- In sections via connecting sleeves, so the structure can be fitted into the E34 and taken apart again later.
- Supplied complete: reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set.
- Unpainted: you decide on the finish yourself.
Suitable for
BMW 5 Series E34, 4-door saloon
- BMW E34 5 Series 4-door saloon
- Type: bolt-in roll cage, version V3
- Drifting, track use and rallying
Technical specifications
- Manufacturer: AST Roll Cages
- Manufacturer part number: CMBN05120
- Sunroof: for roofs without a sunroof
- Headlining: for roofs without headlining
- Rear anchorage: in the rear suspension area
- Rear structure layout: V design
- Type: full roll cage, bolt-in on welded foot plates
- Main hoop: E355 steel, 45 mm diameter
- Secondary structure: E355 steel, 40 mm diameter
- Foot plates: 3 mm steel, custom-designed for each car
- Mounting: 6 bolting points on 6 foot plates welded to the bodyshell
- Weight: 210 kg (manufacturer’s figure)
- Finish: welded and unpainted, split into sections via connecting sleeves
- Included: welded structure, connecting sleeves, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set
Fitting and delivery
The cage is built to order; the standard delivery time is 15 to 35 working days. The foot plates are welded to the bodyshell before the structure is bolted onto them. Bear in mind that the door bars take up space in the door opening, so adapt the door card and seating position accordingly.
The door bars turn the E34 saloon into a cockpit that is protected from the side as well, without giving up the bolt-in construction.
Why choose this Bolt-in E34 Saloon V3 roll cage?
On a drift track, contact usually comes from the side. The door bars of the V3 absorb that energy and give the driver room, while the front bars keep the front end stiff. For a large, heavy saloon like the E34, that is a logical middle ground between the bare basic cage and the most heavily equipped version.
Frequently asked questions
Can I still use the original door cards?
That depends on the chosen position of the bars. The Bolt-in E34 Saloon V3 is custom-designed following a laser scan, so let us know when ordering whether you want to keep the door trim.
What about homologation for competition?
This cage is intended for track and competition use. Always check the regulations of your own federation or organiser before entering, as the requirements differ by class and by country.
What is the delivery time?
The standard delivery time for this roll cage is 15 to 35 working days.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.