Shop

Description

AST Weld-in Roll Cage BMW E39 Sedan V1

The AST Weld-in Roll Cage for the BMW E39 Sedan V1 is a full roll cage for the BMW 5 Series E39 with 4-door saloon bodywork. This Weld-in E39 Sedan V1 is the entry level of the range: a main hoop with backstays, permanently joined to the bodyshell at 8 welded mounting points.

The cage is designed and built by AST Roll Cages in Spain, for drivers who use their E39 as a drift or track car and want a permanent, rigid safety structure.

Key benefits

• 8 welded mounting points on the bodyshell provide a fixed, permanent connection to the car.
• Heavy main frame with an E355 steel main hoop, 45 mm in diameter.
• Custom-scanned, as AST digitises the E39 bodyshell with laser scanners before the tubes are bent.
• Gussets and reinforcement plates are included in the kit, so the loads are spread evenly across the bodywork.
• Complete basic structure at the lowest entry price in the weld-in range.
• Supplied unpainted, so you decide when to paint it and in what colour.

Suitable for

BMW 5 Series E39, 4-door saloon

• BMW E39 Saloon, model years 1995 to 2003
• Type: weld-in roll cage, version V1
• Drifting, track use and rallying

Technical specifications

• Manufacturer: AST Roll Cages
• Manufacturer part number: CMBN07280
• Sunroof: for roofs without a sunroof
• Headlining: for roofs without headlining
• Rear anchorage: in the boot area
• Type: full roll cage, weld-in (permanent)
• Main hoop: E355 steel, 45 mm diameter
• Secondary structure: E355 steel, 40 mm diameter
• Foot plates: 3 mm steel, custom-designed for each car
• Mounting: 8 welded mounting points on the bodyshell
• Weight: 71 kg (manufacturer’s figure)
• Finish: unpainted weld-in kit
• Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. A weld-in cage is permanently welded into the car and should therefore be fitted by an experienced professional, with the interior and trim removed beforehand.

A weld-in cage with 8 welded mounting points gives the E39 a level of rigidity that a bolted construction cannot match.

Why choose this Weld-in E39 Saloon V1 roll cage?

AST digitises the bodyshell with laser scanners and designs the cage in 3D, so every tube sits precisely along the pillars and floor of your E39. That saves hours of trial fitting and cutting during the build. The V1 is the logical choice if you want a solid foundation while keeping the specification level in your own hands.

Frequently asked questions

What exactly will I receive?

With this Weld-in E39 Sedan V1 you receive the complete unpainted weld-in kit with gussets and reinforcement plates, bolts, washers and nuts, documentation, the fitting instructions and a sticker set.

Can I use this cage in competition?

The cage is intended for track and competition use. Always check the regulations of the organiser you race with, as requirements vary by class and by country.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.