AST Half Roll Cage BMW E93 Cabrio V2

€642,08 Incl. VAT

AST Half Roll Cage BMW E93 Cabrio V2

Heavier-spec half roll cage for the open-top BMW E93 convertible, with more tubing and more junctions than the V1. Intended for the convertible, not for the E92 coupé or E90 saloon. Four bolting points on four foot plates welded to the bodyshell, fixed-mounted without connecting sleeves. E355 steel, supplied unpainted. Delivery time 15 to 35 working days.

Available on back-order|Estimated delivery time: 15 tot 35 werkdagen

SKU: CMBN06208 Category: Brand:

Description

AST Half Roll Cage BMW E93 Cabrio V2

The AST Half Roll Cage BMW E93 Convertible V2 is a half roll cage for the BMW E93 with two-door convertible bodywork. This Half Roll Cage E93 Convertible V2 has a more extensive set of bars than the V1, with extra junctions in the rear compartment, and is fixed-mounted on four welded foot plates.

The cage is designed and built by AST Roll Cages in Spain, for drivers who take their open-top E93 on track more often and want to stiffen the rear section of the bodyshell.

Key benefits

  • More tubing than the V1: the more extensive set spreads the loads over extra junctions in the rear compartment.
  • Specific to the open-top E93: without a fixed roof, the bodyshell is structured differently from a coupé or saloon, and this cage is designed around that.
  • Four welded foot plates: four bolting points on foot plates that are welded to the bodyshell, with reinforcement plates on the underside.
  • Fixed mounting: no connecting sleeves, so the construction is tight and simple.
  • E355 steel tubing: main hoop 45 mm, rest of the structure 40 mm.
  • Precision through laser scanning: the E93 bodyshell has been digitised and the cage designed in 3D to match it.
  • Supplied unpainted: includes reinforcement plates, mounting hardware, documentation and a sticker set.

Suitable for

BMW 3 Series E93, two-door convertible

  • Only the open-top BMW E93 convertible with two-door bodywork
  • Not for the E92 coupé or the E90 saloon; these are different body styles with their own cage
  • Type: half roll cage, fixed-mounted, version V2
  • Drifting, track use and rallying

Technical specifications

  • Manufacturer: AST Roll Cages
  • Headlining: for roofs with headlining
  • Rear structure layout: X design
  • Roof compatibility: suitable for the original hardtop
  • Manufacturer part number: CMBN06208
  • Rear anchorage: in the boot area
  • Type: half roll cage, fixed-mounted on welded foot plates, without connecting sleeves
  • Main hoop: E355 steel, 45 mm diameter
  • Secondary structure: E355 steel, 40 mm diameter
  • Foot plates: 3 mm steel, custom-designed for each car
  • Mounting: 4 bolting points on 4 foot plates welded to the bodyshell
  • Weight: 210 kg (manufacturer’s figure)
  • Finish: welded and unpainted
  • Included: welded structure, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. Plan the fitting together with removing the trim and exposing the roof mechanism, as the four foot plates are welded to the bodyshell. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that it fits your car exactly.

Extra tubing behind the seats, exactly where a convertible needs it.

Why choose this half roll cage E93 Convertible V2?

In an open-top car you notice torsional flex sooner than with a closed body. The V2 places more tubes and more connection points behind the seats than the basic version, which makes the rear of the E93 noticeably tighter. The structure is intended for track and competition use; check the regulations of your own organiser before you enter.

Frequently asked questions

Is this the same cage as for the E92 coupé or E90 saloon?

No. The Half Roll Cage E93 Convertible V2 is designed exclusively for the open-top E93 convertible. The E92 coupé and the E90 saloon are different bodyshells with their own mounting points and their own roof structure, and AST supplies separate cages for them. So always check your car’s chassis code before you order.

What is the difference from the V1?

The V1 is the basic version with main hoop and backstays. The V2 has a more extensive set of bars with extra junctions in the rear compartment. Both versions sit on four foot plates welded to the bodyshell and are fixed-mounted without connecting sleeves.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight210 kg
Car make

BMW

Model

E93

Reviews

There are no reviews yet.

Be the first to review “AST Half Roll Cage BMW E93 Cabrio V2”
EN

Your Shopping cart

Close