AST Removable Half Roll Cage BMW G87 Coupé V2

€729,01 Incl. VAT

AST Removable Half Roll Cage BMW G87 Coupé V2

The V2 is the more extensive half roll cage for the BMW 2 Series G87 Coupé: more bracing in the rear compartment than the V1, and still removable from the car via connecting sleeves. Four bolting points on four welded foot plates, a 45 mm main hoop in E355 steel and the remaining tubes in 40 mm. Supplied unpainted with reinforcement plates, mounting hardware, documentation and fitting instructions. Delivery time 15 to 35 working days.

Available on back-order|Estimated delivery time: 15 tot 35 werkdagen

Choose whether the roll cage needs to allow for headlining.

Choose where the roll cage is anchored at the rear.

SKU: CMBN07787 Category: Brand:

Description

AST Removable Half Roll Cage BMW G87 Coupé V2

The AST Removable Half Roll Cage BMW G87 Coupé V2 is a half roll cage for the BMW 2 Series G87 with 2-door Coupé bodywork. This Removable Half Cage G87 Coupé V2 has more bracing in the rear compartment than the V1 and yet remains removable thanks to the connecting sleeves.

The cage is designed and built by AST Roll Cages in Spain, for drivers who want to go a step beyond the basic version but do not want to strip out their G87 for good.

Key benefits

  • A step up from V1: more extensive bracing in the rear compartment for greater rigidity.
  • Still removable: the connecting sleeves let you separate the structure into sections and take it out of the car.
  • Four bolting points: the cage bolts onto four foot plates welded to the bodyshell.
  • E355 steel: 45 mm for the main hoop, 40 mm for the rest of the structure.
  • Reinforcement plates: included, so that the loads are spread over a larger area of the bodyshell.
  • Designed for each car: 3 mm steel foot plates, based on a laser scan of the G87.
  • Supplied unpainted: you choose the colour and when to finish it yourself.
  • Available for cars with and without headlining – you choose this when ordering
  • Available with anchorage in the rear suspension area or in the boot area, which you choose when ordering

Suitable for

BMW 2 Series G87, 2-door coupé

  • BMW 2 Series G87 Coupé, the current M2 from 2023
  • Type: half roll cage, version V2, removable via connecting sleeves
  • Drifting, track use and rallying

The G87 is a compact rear-wheel-drive two-door. AST does not offer a convertible version for this model. The F87 is its predecessor and has its own cage, which does not fit the G87.

Technical specifications

  • Manufacturer: AST Roll Cages
  • Manufacturer part number: CMBN07787
  • Sunroof: for roofs without a sunroof
  • Rear structure layout: X design
  • Type: half roll cage, removable via connecting sleeves
  • Main hoop: E355 steel, 45 mm diameter
  • Secondary structure: E355 steel, 40 mm diameter
  • Foot plates: 3 mm steel, custom-designed for each car
  • Mounting: 4 bolting points on welded foot plates
  • Weight: 71 kg (manufacturer’s figure)
  • Finish: welded and unpainted, in sections via connecting sleeves
  • Included: welded structure, connecting sleeves, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so it fits your car exactly. Welding is limited to the four foot plates; the cage is then bolted in place. Expect more dismantling work than with the V1, as the extra bracing takes up more space in the rear compartment. The G87 is packed with electronics and airbags, so plan the fitting carefully and do not start cutting into the trim blindly. This cage is intended for track and competition use; always check the regulations of your own organiser.

More bracing than the V1, the same four bolting points, and the cage still comes out again easily via the connecting sleeves.

Why choose this Removable Half Cage G87 Coupé V2?

The V2 sits right between a basic cage and a full roll cage. You gain rigidity at the rear and a sturdier mounting point for your harnesses, without bars obstructing access to the seats. For anyone who drives on track regularly but still uses the G87 as a normal car during the week, that is often the best compromise.

Frequently asked questions

What is the difference between the V1 and the V2?

The V1 is the basic version with a main hoop and backstays. The Removable Half Cage G87 Coupé V2 adds extra bracing in the rear compartment, making the structure more rigid and providing more mounting options.

Does this cage also fit an F87 or a convertible?

No. AST does not offer a convertible version for the G87, and the F87 is the predecessor with its own cage, which is not interchangeable with this G87 version.

How reliable is the fit?

AST scans the bodyshell of the G87 with laser scanners and then designs the cage in 3D. The foot plates are designed for each car in 3 mm steel, so that they match the actual shape of the floor.

What if my car has headlining?

When ordering, please state whether the headlining will stay in place, and AST will tailor the roll cage accordingly. This cage is supplied for a roof without a sunroof.

Where is the cage anchored at the rear?

You choose this yourself when ordering: in the rear suspension area or in the boot area. AST designs the foot plates and tube lengths for the chosen area.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight71 kg
Car make

BMW

Model

G87

Reviews

There are no reviews yet.

Be the first to review “AST Removable Half Roll Cage BMW G87 Coupé V2”
EN

Your Shopping cart

Close