AST Multipoint Weld-in Roll Cage BMW E92 Coupé ASN FIA

€1.613,64 Incl. VAT

AST Multipoint Weld-in Roll Cage BMW E92 Coupé ASN FIA

Full roll cage for the BMW 3 Series E92 Coupé, designed by AST to be welded into the bodyshell at twelve points. This is the ASN version that AST offers as its homologated variant, designed and built to the FIA homologation regulations for safety structures. The corresponding ASN and FIA documentation must be ordered together with the structure and approved by your own federation. Delivery time 15 to 35 working days.

Available on back-order|Estimated delivery time: 15 tot 35 werkdagen

SKU: CMBN07537 Category: Brand:

Description

AST Multipoint Weld-in Roll Cage BMW E92 Coupé ASN FIA

The AST Multipoint Weld-in Roll Cage BMW E92 Coupé ASN FIA is a full roll cage for the BMW 3 Series E92 with 2-door coupé bodywork. This Multipoint E92 Coupé ASN FIA is the ASN version from the AST range: the variant that AST offers as a homologated version, supplied with twelve mounting points to the bodyshell.

The cage is designed and built by AST Roll Cages in Spain to the FIA homologation regulations for safety structures, for drivers who want to line up on the grid with a paper dossier for their national federation.

Key benefits

  • ASN version that AST lists as a homologated variant in its range, built to the FIA regulations for safety structures.
  • Twelve mounting points to the bodyshell, more than the regular multipoint versions.
  • E355 steel with a 45 mm main hoop and a 40 mm secondary structure.
  • Floor plates in 3 mm steel, custom-designed for each car.
  • Welding practice material and a weld test piece are included, so the welder can check their settings on the same material.
  • Laser scanning and 3D design deliver a fit measured on the actual bodyshell.
  • Supplied unpainted as a weld-in kit, ready for fitting and your own finish.

Suitable for

BMW 3 Series E92, 2-door Coupé

  • BMW 3 Series E92 Coupé, years of manufacture 2006 to 2013
  • Type: multipoint weld-in roll cage, ASN version
  • Drifting, track use and rallying

The E92 is the coupé of the E90 generation. The saloon (E90), the Touring (E91) and the convertible (E93) each have their own cage, and these are not interchangeable with this Coupé version.

Technical specifications

  • Manufacturer: AST Roll Cages
  • Sunroof: for roofs without a sunroof
  • Headlining: for roofs without headlining
  • Rear anchorage: in the rear suspension area
  • Rear structure layout: V design
  • Manufacturer part number: CMBN07537
  • Type: full roll cage, multipoint weld-in (permanent), ASN version
  • Main hoop: E355 steel, 45 mm diameter
  • Secondary structure: E355 steel, 40 mm diameter
  • Floor and reinforcement plates: 3 mm steel, custom-designed for each car
  • Mounting: 12 mounting points to the bodyshell, to be welded in
  • Weight: 71 kg (manufacturer’s figure)
  • Finish: unpainted weld-in kit
  • Included: bent, cut-to-size tubes with joint pieces, gussets, reinforcement plates, fitting instructions, welding practice material and a weld test piece

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. AST digitises the bodyshell with laser scanners and designs the cage in 3D so that it fits your car exactly. For this version, AST explicitly states that the ASN and FIA documentation must be purchased together with the safety structure. Then have that documentation approved by your own national federation, as only the federation decides whether the cage is permitted in your class.

This is AST’s ASN version; the cage comes with documentation that you need to have signed off by your own federation.

Why choose this Multipoint E92 Coupé ASN FIA roll cage?

If you only drive track days, a regular multipoint cage is all you need. As soon as scrutineering or a competition licence comes into play, the paperwork counts just as much as the steel. AST has built this version to the FIA homologation regulations and supplies it with the corresponding ASN documentation, so you can go to your federation with the paperwork in hand.

Frequently asked questions

Does this cage come with a homologation number?

AST’s product page for this Multipoint E92 Coupé ASN FIA lists neither a homologation number nor a list of permitted engine versions. AST states that the structure has been designed and built to the FIA homologation regulations and that the ASN and FIA documentation is purchased together with the cage. Always have that paperwork assessed by your own federation.

What exactly will I receive?

You receive an unpainted weld-in kit containing bent, cut-to-size tubes with joint pieces, gussets, reinforcement plates, fitting instructions, welding practice material and a weld test piece.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight71 kg
Car make

BMW

Model

E92

Reviews

There are no reviews yet.

Be the first to review “AST Multipoint Weld-in Roll Cage BMW E92 Coupé ASN FIA”
EN

Your Shopping cart

Close