Description
AST Multipoint Weld-in Roll Cage BMW G80 Sedan V3 NASCAR door
The AST Multipoint Weld-in Roll Cage BMW G80 Saloon V3 NASCAR Door Bars is a full roll cage for the BMW 3 Series G80 with 4-door saloon bodywork. This Multipoint G80 Saloon V3 NASCAR is welded in at ten points and has several curved tubes in the door instead of the standard door bar.
The cage is designed and built by AST Roll Cages in Spain, for drivers who put side protection first without going straight for the most comprehensive bar package.
Key benefits
- NASCAR door bars that protect the side of the car and make getting in easier.
- Ten welded mounting points for a wide distribution of loads across the bodyshell.
- V3 specification, the level at which the door bars are added to the frame.
- Lighter build than the V4 and V5, with less tubing in the interior.
- E355 steel, 45 mm main hoop and 40 mm for the rest of the structure.
- Gussets and reinforcement plates are included in the kit.
- Unpainted on delivery, so you choose the finish yourself.
Suitable for
BMW 3 Series G80, 4-door saloon
- BMW 3 Series G80 4-door saloon
- Type: full roll cage, multipoint weld-in, version V3 with NASCAR door bars
- Drifting, track use and rallying
Technical specifications
- Manufacturer: AST Roll Cages
- Manufacturer part number: CMBN07781
- Sunroof: for roofs without a sunroof
- Headlining: for roofs without headlining
- Rear anchorage: in the rear suspension area
- Rear structure layout: V design
- Type: full roll cage, multipoint weld-in (permanent), with NASCAR door bars
- Main hoop: E355 steel, 45 mm diameter
- Secondary structure: E355 steel, 40 mm diameter
- Foot plates: 3 mm steel, custom-designed for each car
- Mounting: 10 welded mounting points on the bodyshell
- Weight: 71 kg (manufacturer’s figure)
- Finish: unpainted weld-in kit
- Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set
Fitting and delivery
The cage is built to order; the standard delivery time is 15 to 35 working days. The doors of the G80 have to be opened up for the NASCAR tubes; agree with your fitter how the door cards will be finished afterwards.
Side protection first, with ten welded mounting points and an entry that stays roomy.
Why choose this Multipoint G80 Saloon V3 NASCAR roll cage?
Not everyone wants the full set of bars in their interior, but they do want the door properly protected. This V3 does exactly that. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that it fits your car exactly, including the curved tubes in the door opening.
Frequently asked questions
Why V3 and not V4?
The Multipoint G80 Saloon V3 NASCAR has less tubing in the interior than the V4 and therefore leaves more room, while you still get the NASCAR door bars and ten welded mounting points.
How does AST make sure the cage fits?
The bodyshell of the G80 is digitised with laser scanners and the cage is then designed in 3D on that basis. The delivery includes the weld-in kit, gussets, reinforcement plates, mounting hardware, documentation, fitting instructions and a sticker set.
What should I bear in mind with a modern car like the G80?
With all the electronics and airbag systems in a modern car like the G80, fitting a cage has to be carefully planned, especially when tubes go into the doors. Always check the regulations of your own organiser, as they determine which version you are allowed to run in your class.
What is the delivery time?
The standard delivery time for this roll cage is 15 to 35 working days.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.