AST Weld-in Roll Cage Nissan Silvia S15 Coupé V4

€1.158,89 Incl. VAT

AST Weld-in Roll Cage Nissan Silvia S15 Coupé V4

This Weld-in S15 Coupé V4 is a full roll cage from AST Roll Cages for the two-door Nissan Silvia S15, welded in at eight points and extended with an extra diagonal brace and a harness bar behind the seats.

V design rear structure. E355 steel, 45 mm main hoop, 40 mm for the other tubes, supplied as an unpainted weld-in kit.

Delivery time 15 to 35 working days.

Available on back-order|Estimated delivery time: 15 tot 35 werkdagen

SKU: CMBN04011 Category: Brand:

Description

AST Weld-in Roll Cage Nissan Silvia S15 Coupé V4

The Weld-in S15 Coupé V4 is a full roll cage from AST Roll Cages for the two-door Nissan Silvia S15, permanently welded to the bodyshell at eight points.

On top of the door bars of the V3 come an extra diagonal brace in the main hoop and a harness bar behind the seats. The diagonal keeps the main hoop in shape in a rollover; without it, a hoop can deform in its own plane. The harness bar gives your shoulder straps an anchor point at the right height, something the original mounting points of an S15 cannot provide.

The rear structure has a V design. The cage is supplied unpainted.

Key benefits

  • Harness bar behind the seats for the correct belt angle
  • Extra diagonal brace in the main hoop to prevent deformation in a rollover
  • Door bars in both doors, carried over from the V3
  • Eight welded mounting points, permanently joined to the bodyshell
  • V design rear structure
  • E355 steel, 45 mm main hoop and 40 mm secondary structure
  • Custom-made via laser scan of the original bodyshell

Suitable for

Nissan Silvia S15, two-door Coupé

  • S15 Spec-R and Spec-S, rear-wheel drive
  • Roofs without a sunroof
  • Roofs without headlining
  • Drifting, track days and competition use

Technical specifications

  • Manufacturer: AST Roll Cages
  • Part number: CMBN04011
  • Material: E355 steel
  • Main hoop tube diameter: 45 mm
  • Secondary structure tube diameter: 40 mm
  • Foot and reinforcement plates: 3 mm steel, custom-made for each car
  • Mounting: 8 welded mounting points on the bodyshell
  • Weight: 210 kg
  • Finish: unpainted
  • Sunroof: for roofs without a sunroof
  • Headlining: for roofs without headlining
  • Rear anchorage: in the rear suspension area
  • Rear structure layout: V design
  • Included: weld-in kit, gussets, reinforcement plates, bolts, washers, nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The order matters here. Test-fit the bucket seats in their final position before the harness bar is welded in, because the height of that bar determines the angle of your shoulder straps. Correcting it after welding means grinding. Otherwise: stripped car, bare metal at the welding points, eight points to weld.

Every cage is custom-built after you order, with a delivery time of 15 to 35 working days.

The version in which your harnesses finally sit where they should.

Why choose this Weld-in S15 Coupé V4?

Many S15 builders only discover at their first scrutineering that their harness straps run at too steep an angle. The original mounting points are simply too low for that. The harness bar in this version solves that in one go, and the extra diagonal in the main hoop provides exactly the rigidity that matters in a rollover. For a car that goes on track every week, this is the level most drivers eventually end up at.

Frequently asked questions

Is this a half or a full roll cage?

A full roll cage, welded at eight points and extending into the front compartment.

What does V4 add compared with V3?

The Weld-in S15 Coupé V4 has an extra diagonal brace and a harness bar behind the seats. The V3 does not.

Can I attach my shoulder straps to the harness bar?

Yes, that is what the bar is for. Set the seating position first, so that the angle matches what your harness manufacturer specifies.

Can the cage be removed later?

Not without grinding. A weld-in cage is permanently welded to the bodyshell.

Is this roll cage homologated?

AST does not state an FIA homologation number for this item. The cage is intended for track and competition use; check the regulations of your own organiser.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight210 kg
Car make

Nissan

Model

Reviews

There are no reviews yet.

Be the first to review “AST Weld-in Roll Cage Nissan Silvia S15 Coupé V4”
EN

Your Shopping cart

Close