Shop

The MTS Street Golf 7 Inox is a height-adjustable coilover kit from MTS Technik for the Volkswagen Golf 7/8 / Arteon, Audi A3 8V/8Y / TT FV, Seat Leon 5F/KL and Skoda Octavia 3/4, from model year 2012. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits of the MTS Street Golf 7 Inox

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 10 to 70 mm, front and rear independently adjustable
• Eibach springs of 28 to 40 N/mm front and 80 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street Golf 7 Inox fits the following versions:

• Volkswagen Golf 7 (also Variant, 08/2012 to 01/2022): 1.0 TSI, 1.2 TSI, 1.4 TGI CNG, 1.4 TSI, 1.4 TSI MultiFuel, 1.5 TGI, 1.5 TSI, 1.6, 1.6 TDI, 2.0 GTD, 2.0 GTI, 2.0 GTI Clubsport, 2.0 TDI, 1.6 TDI 4motion, 2.0 R 4motion, 2.0 TDI 4motion, 1.8 TSI
• Volkswagen Golf 8 (also Variant, type CD1/DA1/CG5/DB5, from 07/2019): 1.0 eTSI, 1.0 TSI, 1.5 eTSI, 1.5 TGI, 1.5 TSI, 2.0 GTI, 2.0 GTI Clubsport, 2.0 TDI, 2.0 TDI GTD, 2.0 TSI, 2.0 TDI 4motion, 2.0 TSI 4motion, 2.0 TSI R 4motion
• Volkswagen Arteon (type 3H7/3H8, from 03/2017): 1.5 TSI, 2.0 TDI, 2.0 TSI
• Audi A3 8V (also Sportback, Sedan and Cabrio, 04/2012 to 08/2021): 1.0 TFSI, 1.2 TFSI, 1.4 TFSI, 1.4 TSI, 1.5 TFSI, 1.6 TDI, 1.8 TFSI, 2.0 TDI, 2.0 TFSI, 1.8 TFSI quattro, 2.0 TDI quattro, 2.0 TFSI quattro, S3 quattro, 1.4 TFSI g-tron, 30 g-tron, 30 TDI, 30 TFSI, 35 TDI, 35 TFSI, 40 TFSI, 1.6 TDI quattro, 40 TDI quattro, 40 TFSI quattro, RS3 quattro
• Audi A3 8Y Sportback and Sedan (type 8YA/8YF/8YS/8YM, from 11/2019): 30 g-tron, 30 TDI, 30 TFSI, 35 TDI, 35 TFSI, 40 TFSIe, 40 TDI quattro, S3 quattro
• Audi TT FV (also Roadster, type FV3/FVP/FV9/FVR, from 07/2014): 1.8 TFSI, 2.0 TDI, 2.0 TFSI, 40 TFSI, 45 TFSI, 2.0 TDI quattro, 2.0 TFSI quattro, 2.0 TTS quattro, 2.5 RS quattro, 45 TFSI quattro
• Seat Leon 5F (also ST and SC, type 5F1/5F8/5F5, 09/2012 to 05/2021): 1.0 TSI, 1.2 TSI, 1.4 TGI, 1.4 TSI, 1.5 TGi, 1.5 TSI, 1.6 TDI, 1.8 TSI, 2.0 Cupra, 2.0 Cupra R, 2.0 TDI, 2.0 TSI, 1.6 TDI 4Drive, 1.8 TSI 4Drive, 2.0 Cupra 4Drive, 2.0 TDI 4Drive, 2.0 TSI 4Drive
• Seat Leon KL (also Sportstourer, type KL1/KLG/KL8/KLD, from 11/2019): 1.0 TSI, 1.5 eTSI, 1.5 TGI CNG, 1.5 TSI, 2.0 TDI, 2.0 TFSI
• Skoda Octavia 3 (also Combi, 11/2012 to 03/2021): 1.0 TSI, 1.2 TSI, 1.4 TSI, 1.5 TSI, 1.6, 1.6 TDI, 1.8 TSI, 2.0 TDI, 2.0 TDI RS, 2.0 TSI, 2.0 TSI RS, 1.6 TDI 4×4, 1.8 TSI 4×4, 2.0 TDI 4×4, TDI RS 4×4, 2.0 TSI 4×4
• Skoda Octavia 4 (also Combi, from 11/2019): 1.0 TSI, 1.0 TSI e-TEC, 1.4 TSI RS iV, 1.5 TSI, 1.5 TSI e-TEC, 1.5 TSI G-TEC, 1.6 SRE, 2.0 TDI, 2.0 TDI RS, 2.0 TSI RS, 2.0 TDI 4×4, 2.0 TDI RS 4×4, 2.0 TSI 4×4, 1.4 TSI

Note for the MTS Street Golf 7 Inox: only for cars with a multilink rear axle. Not suitable for the GTE. Axle load: maximum 1080 kg front and maximum 1110 kg rear; check your car’s vehicle type plate.

Fitting is also possible on cars with electronically adjustable damping; that system must then be disabled.

Technical specifications of the MTS Street Golf 7 Inox

• Product: MTS Street Golf 7 Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWVW52
• EAN: 5903855625327
• Version: Street, Inox (stainless steel)
• Lowering: front 10 to 70 mm, rear 20 to 70 mm (depending on the model)
• Springs (Eibach): GWFE14VA with 28 to 40 N/mm front, GWFE81 with 80 N/mm rear
• Helper springs: GWHE02 (20 N/mm)
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Rear axle: multilink
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street Golf 7 Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After fitting the MTS Street Golf 7 Inox, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street Golf 7 Inox combines stainless steel damper bodies, Eibach springs of 28-40 and 80 N/mm and up to 70 mm of lowering for the Volkswagen Golf 7/8 / Arteon, Audi A3 8V/8Y / TT FV, Seat Leon 5F/KL and Skoda Octavia 3/4.

Why choose the MTS Street Golf 7 Inox?

With the MTS Street Golf 7 Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street Golf 7 Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the Golf 7

• Volkswagen Golf 7/8 / Arteon, Audi A3 8V/8Y (12-) MTS Technik coilover kit (multilink rear axle, front axle 1081 to 1180 kg)
• Volkswagen Golf 7/8, Audi A3 8V/8Y (12-) MTS Technik coilover kit (torsion beam rear axle, front axle up to 1080 kg)
• Volkswagen Golf 7/8, Audi A3 8V/8Y (12-) MTS Technik coilover kit (torsion beam rear axle, front axle 1081 to 1180 kg)
• Volkswagen Passat B8 / Touran 5T, Audi Q2 GA (14-) MTS Technik coilover kit (multilink rear axle)