Shop

The MTS Street Model 3 Inox is a height-adjustable coilover kit from MTS Technik for the Tesla Model 3 / Model Y, from model year 2017. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 20 to 55 mm, front and rear independently adjustable
• Eibach springs of 74 N/mm front and 60 to 95 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• 2 year warranty with no mileage limit

Suitable for

The MTS Street Model 3 Inox fits the following versions:

• Tesla Model 3 (type 5YJ3, from 01/2017): EV
• Tesla Model Y (type 5YJY, 03/2019 to 01/2025): EV

Note: axle load: maximum 1363 kg front and maximum 1590 kg rear; check your car’s vehicle type plate.

For the rear-wheel drive versions.

Technical specifications

• Product: MTS Street Model 3 Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWTE02
• EAN: 5903855656338
• Version: Street, Inox (stainless steel)
• Lowering: front 20 to 55 mm, rear 20 to 45 mm
• Springs (Eibach): GWFE318VA with 74 N/mm front, GWFE316HA with 60 to 95 N/mm rear
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: no
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street Model 3 Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street Model 3 Inox combines stainless steel damper bodies, Eibach springs of 74 and 60-95 N/mm and up to 55 mm of lowering for the Tesla Model 3 / Model Y.

Why choose the MTS Street Model 3 Inox?

With the MTS Street Model 3 Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street Model 3 Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the Model 3

• Tesla Model 3 / Model Y AWD (17-) MTS Technik coilover kit