Shop

The MTS Street C-klasse W204 Inox is a height-adjustable coilover kit from MTS Technik for the Mercedes C-klasse W204/S204/C204 / E-klasse C207/A207, from model year 2007. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits of the MTS Street C-klasse W204 Inox

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 15 to 60 mm, front and rear independently adjustable
• Eibach springs of 42 N/mm front and 85 to 95 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street C-klasse W204 Inox fits the following versions:

• Mercedes C-klasse W204 (type W204, 01/2007 to 01/2015): C 180 CDI, C 180 CGI, C 180 Kompressor, C 200 CDI, C 200 CGI, C 200 Kompressor, C 220 CDI, C 230, C 250 CDI, C 250 CGI, C 280, C 300, C 320 CDI, C 350, C 350 CDI, C 350 CGI
• Mercedes C-Class S204 Estate (type S204, 08/2007 to 08/2014): C 180 CDI, C 180 CGI, C 180 Kompressor, C 200 CDI, C 200 CGI, C 200 Kompressor, C 220 CDI, C 230, C 250 CDI, C 250 CGI, C 280, C 300, C 320 CDI, C 350, C 350 CDI, C 350 CGI
• Mercedes C-Class C204 Coupe (type C204, from 01/2011): C 180, C 200 CGI, C 220 CDI, C 250, C 350
• Mercedes E-Class C207 Coupe (type C207, 01/2009 to 12/2016): E 200, E 200 CGI, E 220 BlueTEC, E 220 CDI, d, E 250, E 250 CDI, BlueTEC, E 250 CGI, E 300, E 320, E 350, E 350 BlueTEC, E 350 CDI, E 350 CGI, E 400, E 500
• Mercedes E-Class A207 Cabrio (type A207, 01/2010 to 12/2016): E 200, E 200 CGI, E 220 BlueTEC, E 220 CDI, BlueTEC, d, E 250, E 250 CDI, E 250 CGI, E 300, E 320, E 350, E 350 BlueTEC, E 350 BlueTEC/ d, E 350 CDI, E 350 CGI, E 400, E 500

Note for the MTS Street C-klasse W204 Inox: only for cars without electronically controlled damping. Axle load: maximum 1050 kg front and maximum 1245 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Street C-klasse W204 Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWMB04
• EAN: 5903855652538
• Version: Street, Inox (stainless steel)
• Lowering: front 15 to 60 mm, rear 15 to 60 mm (depending on the model)
• Springs (Eibach): GWFE65VA with 42 N/mm front, GWFE62HA with 85 to 95 N/mm rear
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 29.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street C-klasse W204 Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After fitting the MTS Street C-klasse W204 Inox, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street C-klasse W204 Inox combines stainless steel damper bodies, Eibach springs of 42 and 85-95 N/mm and up to 60 mm of lowering for the Mercedes C-klasse W204/S204/C204 / E-klasse C207/A207.

Why choose the MTS Street C-klasse W204 Inox?

With the MTS Street C-klasse W204 Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street C-klasse W204 Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the C-klasse W204

• Mercedes C-klasse W204/S204/C204 / E-klasse C207/A207 (07-) MTS Technik coilover kit (front axle 1021 to 1145 kg)