Shop

The MTS E-klasse W124 is a height-adjustable coilover kit from MTS Technik for the Mercedes E-klasse W124/C124 / 190 W201, model years 1982 to 1997. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.

Key benefits

• Zinc-plated damper bodies with a yellow zinc coating to protect against rust
• Lower by 30 to 75 mm, front and rear independently adjustable
• Eibach springs, matched to this set
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS E-klasse W124 fits the following versions:

• Mercedes E-Class W124 (also Sedan, type W124, 12/1984 to 06/1996): 200, 200 D, 200 E, 220 E, 230 E, 230 E Cat, 250 D, 250 Turbo-D, 260 E, 280 E, 300 D, 300 E, 300 E-24, 300 Turbo-D, 320 E, E 200, E 200 D, E 220, E 250 D, E 250 Turbo-D, E 280, E 300 D, E 300 Turbo-D, E 320
• Mercedes E-Class C124 Coupe (type C124, 03/1987 to 06/1997): 220 CE, 230 CE, 230 CE Cat, E 200, E 220, E 320
• Mercedes 190 W201 (type W201, 10/1982 to 08/1993): 190 D, 2.0, 2.3, 2.3 E, 2.6, D 2.0, D 2.5, E 1.8, E 2.0, E 2.3, E 2.3-16, E 2.5-16, E 2.6, Turbo-D 2.5

Note: not suitable for versions with four-wheel drive (4MATIC). Only for cars without level control (NIVO) or factory air suspension. Not suitable for the AMG versions. Axle load: maximum 1050 kg front and maximum 1150 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS E-klasse W124
• Manufacturer: MTS Technik
• Article number: MTSGWMB01
• EAN: 5903357784591
• Version: Street, Gold (zinc-plated steel)
• Lowering: front 30 to 75 mm, rear 20 to 75 mm (depending on the model)
• Height adjustment: front and rear via springs with adjuster element
• Thread block rear: at the bottom
• Thread block front: at the top
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 29.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS E-klasse W124 replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS E-klasse W124 combines zinc-plated damper bodies and up to 75 mm of lowering for the Mercedes E-klasse W124/C124 / 190 W201.

Why choose the MTS E-klasse W124?

Street is the setup that MTS Technik itself recommends as the standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust.

Frequently asked questions

Does this kit also fit a four-wheel-drive (4MATIC) version?

No. The MTS E-klasse W124 is not suitable for the four-wheel-drive versions.

How long does delivery take?

The MTS E-klasse W124 is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the E-klasse W124

• Mercedes E-Class W124/C124 (84-97) MTS Technik coilover kit
• Mercedes 190 W201 (82-93) MTS Technik coilover kit