Shop

The MTS Street Civic FN Gold is a height-adjustable coilover kit from MTS Technik for the Honda Civic FN, model years 2005 to 2013. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.

Key benefits

• Zinc-plated damper bodies with a yellow zinc coating to protect against rust
• Lower by 5 to 30 mm, front and rear independently adjustable
• Eibach springs of 22.3 to 31.24 N/mm front
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street Civic FN Gold fits the following versions:

• Honda Civic FN Hatchback (type FN/FK, 09/2005 to 12/2013): 2.0 i-VTEC Type R, Type R

Note: only for cars without EDC (electronic damping control). Axle load: 941 to 1085 kg front and maximum 835 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Street Civic FN Gold
• Manufacturer: MTS Technik
• Article number: MTSGWHO06
• EAN: 5903855618541
• Version: Street, Gold (zinc-plated steel)
• Lowering: front 5 to 30 mm, rear 10 to 35 mm
• Springs (Eibach): GWFE322HA with 22.3 to 31.24 N/mm front
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street Civic FN Gold replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street Civic FN Gold combines zinc-plated damper bodies, Eibach springs of 22.3-31.24 N/mm and up to 30 mm of lowering for the Honda Civic FN.

Why choose the MTS Street Civic FN Gold?

Street is the setup that MTS Technik itself recommends as the standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies.

Frequently asked questions

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street Civic FN Gold is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the Civic FN

• Honda Civic FN (05-13) MTS Technik coilover kit (front axle up to 940 kg)