Shop

The MTS Street Fiesta 7 Gold is a height-adjustable coilover kit from MTS Technik for the Ford Fiesta 7, from model year 2017. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.

Key benefits

• Zinc-plated damper bodies with a yellow zinc coating to protect against rust
• Lower by 15 to 45 mm, front and rear independently adjustable
• Eibach springs of 32.5 N/mm front and 21 to 30 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• 2 year warranty with no mileage limit

Suitable for

The MTS Street Fiesta 7 Gold fits the following versions:

• Ford Fiesta 7 (type HJ/HF, from 05/2017): 1.0 EcoBoost, 1.0 EcoBoost Active, 1.0 EcoBoost mHEV, 1.0 EcoBoost mHEV Active, 1.1 Ti-VCT, 1.5 ST EcoBoost, 1.5 TDCi, 1.5 TDCi Active

Note: axle load: maximum 900 kg front and maximum 860 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Street Fiesta 7 Gold
• Manufacturer: MTS Technik
• Article number: MTSGWFO23
• EAN: 5903855628908
• Version: Street, Gold (zinc-plated steel)
• Lowering: front 15 to 45 mm, rear 20 to 60 mm
• Springs (Eibach): GWFE261VA with 32.5 N/mm front, GWFE15HA with 21 to 30 N/mm rear
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: no
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street Fiesta 7 Gold replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street Fiesta 7 Gold combines zinc-plated damper bodies, Eibach springs of 32.5 and 21-30 N/mm and up to 45 mm of lowering for the Ford Fiesta 7.

Why choose the MTS Street Fiesta 7 Gold?

With the MTS Street Fiesta 7 Gold you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies.

Frequently asked questions

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street Fiesta 7 Gold is delivered within 4 to 7 working days as long as the manufacturer has stock.