Ford Focus 2, Volvo C30 (03-) MTS Technik Street coilover kit Inox (not for RS and MPS)

€619,01 Incl. VAT

The MTS Street Focus 2 Inox is a height-adjustable coilover kit with stainless steel damper bodies for the Ford Focus 2 and Volvo C30 / S40 II / V50 (not for 4×4).

  • Lowers 25 to 70 mm at the front and 15 to 60 mm at the rear
  • Eibach springs, TÜV certificate and 2 years warranty with no mileage limit
  • Delivery time 4 to 7 working days while manufacturer stock lasts

Also available in another versionClick a kit to view it.

●Goldzinc-plated steelStreetall-round
MTS Street Focus 2 Gold coilover kit
Lowering F/R (mm)25‑70 / 15‑60
Springs F/R (N/mm)60 / 30‑84
Price€649,00View ›
●Inoxstainless steelStreetall-round
MTS Street Focus 2 Inox coilover kit
Lowering F/R (mm)25‑70 / 15‑60
Springs F/R (N/mm)60 / 30‑84
Price€749,00this kit

Available on back-order|Estimated delivery time: 4 to 7 working days

SKU: XMTSGWFO01 Category: Brand:

Description

The MTS Street Focus 2 Inox is a height-adjustable coilover kit from MTS Technik for the Ford Focus 2 and Volvo C30 / S40 II / V50, from model year 2003. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

  • Stainless steel damper bodies, resistant to road salt and moisture
  • Lower by 25 to 70 mm, front and rear independently adjustable
  • Eibach springs of 60 N/mm front and 30 to 84 N/mm rear
  • Gas-oil twin-tube dampers that stay stable even under intensive use
  • hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
  • TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street Focus 2 Inox fits the following versions:

  • Ford Focus 2 (also Sedan, from 07/2004): 1.4, 1.6, 1.6 TDCi, 1.6 Ti, 1.8, 1.8 Flexifuel, 1.8 TDCi, 2.0, 2.0 CNG, 2.0 Flex, 2.0 LPG, 2.0 TDCi, 2.5 ST, 1.6 Flex
  • Volvo C30 (type 533, 09/2006 to 12/2013): 1.6, 1.6 D, 1.8, 2.0, 2.0 D, 2.4 i, D2, D3, D4, D5, Electric, T5
  • Volvo S40 II (type 544, 01/2004 to 12/2012): 1.6, 1.6 D, 1.8, 1.8 FlexFuel, 2.0, 2.0 CDI, 2.0 D, 2.0 F, 2.4, 2.4 CDI, D2, D3, D4, D5, T5
  • Volvo V50 (type 545, 12/2003 to 12/2012): 1.6, 1.6 D, 1.8, 1.8 FlexFuel, 2.0, 2.0 CDI, 2.0 D, 2.0 D4, 2.0 FlexFuel, 2.4, 2.4 Tdi, D2, D3, D4, D5, T5

Note for the MTS Street Focus 2 Inox: not suitable for versions with four-wheel drive (AWD). Axle load: maximum 1110 kg front and maximum 1165 kg rear; check your car’s vehicle type plate.

Not suitable for the RS, RS500 and MPS.

Technical specifications

  • Product: MTS Street Focus 2 Inox
  • Manufacturer: MTS Technik
  • Article number: XMTSGWFO01
  • EAN: 5903855629660
  • Version: Street, Inox (stainless steel)
  • Lowering: front 25 to 70 mm, rear 15 to 60 mm
  • Springs (Eibach): GWFE96 with 60 N/mm front, GWFE37HA with 30 to 84 N/mm rear
  • Helper springs: GWHE01 (20 N/mm)
  • Height adjustment: front via threaded damper body, rear via separate adjuster element
  • Thread block rear: at the top
  • Camber plates: not included
  • Included: complete front and rear set with springs and height adjustment
  • TÜV certificate: yes
  • Weight: 24.9 kg
  • Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street Focus 2 Inox replaces the original dampers and springs and fits on the original mounting points.

  • The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
  • When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
  • Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
  • After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street Focus 2 Inox combines stainless steel damper bodies, Eibach springs of 60 and 30-84 N/mm and up to 70 mm of lowering for the Ford Focus 2 and Volvo C30 / S40 II / V50.

Why choose the MTS Street Focus 2 Inox?

With the MTS Street Focus 2 Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

Does this kit also fit a four-wheel-drive (AWD) version?

No. The MTS Street Focus 2 Inox is not suitable for the four-wheel-drive versions.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street Focus 2 Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the Focus 2

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight25 kg
Car make

Ford, Volvo

Model

C30, Focus, S40, V50

Reviews

There are no reviews yet.

Be the first to review “Ford Focus 2, Volvo C30 (03-) MTS Technik Street coilover kit Inox (not for RS and MPS)”
EN

Your Shopping cart

Close