Shop

The MTS Stance Grande Punto Inox is a height-adjustable coilover kit from MTS Technik for the Fiat Grande Punto / Punto / Punto Evo, Opel Corsa D/E / Adam and Alfa Romeo MiTo, from model year 2005. Stance is the lowest and firmest setup from MTS Technik, for those who want the wheel tight under the wheel arch.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 20 to 50 mm, front and rear independently adjustable
• Eibach springs, matched to this set
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Stance Grande Punto Inox fits the following versions:

• Fiat Grande Punto (type 199, from 06/2005): 1.2, 1.3 D Multijet, 1.4 16V, 1.4, 1.4 LPG, 1.4 Natural Power, 1.4 T-Jet, 1.6 D Multijet, 1.9 D Multijet, 1.4 T-Jet /
• Fiat Punto (type 199, from 01/2012): 0.9 Bifuel, 0.9 Twinair Turbo, 1.2, 1.3 D Multijet, 1.4, 1.4 Bifuel, 1.4 Multi Air, 1.4 Natural Power, 1.4 Turbo Multi Air
• Fiat Punto Evo (type 199, from 07/2008): 1.2, 1.3 D Multijet, 1.4 16V, 1.4, 1.4 LPG, 1.4 Natural Power, 1.6 D Multijet
• Opel Corsa D (type S07, 07/2006 to 04/2015): 1.0, 1.2, 1.3 CDTI, 1.4, 1.7 CDTI, 1.6 Turbo
• Opel Corsa E (type X15, from 09/2014): 1.0, 1.2, 1.3 CDTI, 1.4, 1.4 Turbo, 1.6 Turbo
• Opel Adam (type M13, 10/2012 to 05/2019): 1.0, 1.2, 1.4, 1.4 LPG, 1.4 S
• Alfa Romeo MiTo (type 955, 08/2008 to 10/2018): 0.9 TwinAir, 1.3 MultiJet, 1.4, 1.4 Bifuel, 1.4 MultiAir, 1.4 TB, 1.4 TJet, 1.4 Turbo MultiAir, 1.6 JTDM

Note for the MTS Stance Grande Punto Inox: axle load: maximum 1000 kg front and maximum 950 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Stance Grande Punto Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWFI01-S
• EAN: 5903855652217
• Version: Stance, Inox (stainless steel)
• Lowering: front 20 to 50 mm, rear 15 to 45 mm
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Stance Grande Punto Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After fitting the MTS Stance Grande Punto Inox, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Stance Grande Punto Inox combines stainless steel damper bodies and up to 50 mm of lowering for the Fiat Grande Punto / Punto / Punto Evo, Opel Corsa D/E / Adam and Alfa Romeo MiTo.

Why choose the MTS Stance Grande Punto Inox?

With the MTS Stance Grande Punto Inox you choose the lowest possible car with direct, firm handling; the stiffer springs keep the body steady, even with a large lowering. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

What is the difference between Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Street (32 and 25-70 N/mm) and Stance (25-70 N/mm). Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Stance Grande Punto Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.