Shop

The MTS Street Challenger 3 Gold is a height-adjustable coilover kit from MTS Technik for the Dodge Challenger 3 / Charger 7, Chrysler 300C and Lancia Thema, from model year 2007. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.

Key benefits

• Zinc-plated damper bodies with a yellow zinc coating to protect against rust
• Lower by 30 to 80 mm, front and rear independently adjustable
• Eibach springs of 84 N/mm front and 122 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• 2 year warranty with no mileage limit

Suitable for

The MTS Street Challenger 3 Gold fits the following versions:

• Dodge Challenger 3 Coupe (09/2007 to 12/2016): 3.5, 3.6, 3.6 Flexfuel, 5.7, 6.4, 6.4 SRT8
• Dodge Charger 7 (from 09/2010): 3.6, 3.6 Flexfuel, 5.7 R/T, 6.4 SRT8
• Chrysler 300C (type LX, from 09/2010): 3.6, 3.6 Flexfuel, 5.7, 5.7 Flexfuel, 6.4
• Lancia Thema (type LX, 09/2011 to 10/2014): 3.0 D, 3.6

Note: not suitable for versions with four-wheel drive (4×4). Only for cars without level control (NIVO) or factory air suspension. Axle load: maximum 1275 kg front and maximum 1275 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Street Challenger 3 Gold
• Manufacturer: MTS Technik
• Article number: MTSGWDO01
• EAN: 5903855628977
• Version: Street, Gold (zinc-plated steel)
• Lowering: front 30 to 80 mm, rear 30 to 90 mm
• Springs (Eibach): GWFE255VA with 84 N/mm front, GWFE313HA with 122 N/mm rear
• Helper springs: GWHE01 (20 N/mm)
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: no
• Weight: 29.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street Challenger 3 Gold replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street Challenger 3 Gold combines zinc-plated damper bodies, Eibach springs of 84 and 122 N/mm and up to 80 mm of lowering for the Dodge Challenger 3 / Charger 7, Chrysler 300C and Lancia Thema.

Why choose the MTS Street Challenger 3 Gold?

With the MTS Street Challenger 3 Gold you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies.

Frequently asked questions

Does this kit also fit a four-wheel-drive (4×4) version?

No. The MTS Street Challenger 3 Gold is not suitable for the four-wheel-drive versions.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street Challenger 3 Gold is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the Challenger 3

• Chrysler 300C, Dodge Magnum (04-) MTS Technik coilover kit