Shop

The MTS Stance GT86 BRZ Gold is a height-adjustable coilover kit from MTS Technik for the Toyota GT86 and GR86, Subaru BRZ and Scion FR-S, from model year 2012. Stance is the lowest and firmest setup from MTS Technik, for those who want the wheel tight under the wheel arch.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.

Key benefits

• Zinc-plated damper bodies with a yellow zinc coating to protect against rust
• Lower by 15 to 50 mm, front and rear independently adjustable
• Eibach springs of 70 N/mm front and 70 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• Front camber plates included, so you can adjust the camber
• 2 year warranty with no mileage limit

Suitable for

The MTS Stance GT86 BRZ Gold fits the following versions:

• Scion FR-S Coupe (from 01/2013): 2.0 (ZC6)
• Toyota GT86 Coupe (ZN6) (from 03/2012): 2.0 (ZN6), 2.0 (ZN6AC_, ZN6BC_), 2.0 (ZN6EY_)
• Toyota GR86 Coupe (ZN8) (from 09/2021): 2.4, 2.4 (ZN8)
• Subaru BRZ (ZC) (from 06/2012): 2.0 (ZC6)
• Subaru BRZ (ZD8) (from 10/2021): 2.4

Note for the MTS Stance GT86 BRZ Gold: axle load: maximum 876 kg front and maximum 943 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Stance GT86 BRZ Gold
• Manufacturer: MTS Technik
• Article number: MTSGWTO03-S
• EAN: 5903855628861
• Version: Stance, Gold (zinc-plated steel)
• Lowering: front 15 to 50 mm, rear 20 to 55 mm
• Springs (Eibach): GWFE84 with 70 N/mm front, GWFE93 with 70 N/mm rear
• Helper springs: GWHE01 (20 N/mm)
• Height adjustment: front and rear via threaded damper body
• Camber plates: included at the front
• Included: complete front and rear set with springs and height adjustment, plus front camber plates
• TÜV certificate: no
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Stance GT86 BRZ Gold replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Stance GT86 BRZ Gold combines zinc-plated damper bodies, Eibach springs of 70 and 70 N/mm and up to 50 mm of lowering for the Toyota GT86 and GR86, Subaru BRZ and Scion FR-S.

Why choose the MTS Stance GT86 BRZ Gold?

With the MTS Stance GT86 BRZ Gold you choose the lowest possible car with direct, firm handling; the stiffer springs keep the body steady, even with a large lowering. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies. With the included camber plates you set the camber, which with a large lowering means less tyre wear and more grip.

Frequently asked questions

What is the difference between Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Street (50 and 60 N/mm) and Stance (70 and 70 N/mm). Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Stance GT86 BRZ Gold is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the GT86 BRZ

• Toyota GT86 / Subaru BRZ (12-) MTS Technik coilover kit