Description
The MTS Street Z4 E85 E86 Inox is a height-adjustable coilover kit from MTS Technik for the BMW Z4 E85 and E86, model years 2002 to 2009. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.
On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.
Key benefits
- Stainless steel damper bodies, resistant to road salt and moisture
- Lower by 40 to 85 mm, front and rear independently adjustable
- Eibach springs of 60 N/mm front and 46 to 90.1 N/mm rear
- Gas-oil twin-tube dampers that stay stable even under intensive use
- hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
- Front camber plates included, so you can adjust the camber
- 2 year warranty with no mileage limit
Suitable for
The MTS Street Z4 E85 E86 Inox fits the following versions:
- Z4 Coupe (E86) (03/2006 to 12/2009): 3.0si
- Z4 Roadster (E85) (09/2002 to 12/2009): 2.0i, 2.2i, 2.5i, 2.5si, 3.0i, 3.0si
Note for the MTS Street Z4 E85 E86 Inox: axle load: maximum 790 kg front and maximum 890 kg rear; check your car’s vehicle type plate.
Also suitable for versions with M-Technik (M package).
Technical specifications
- Product: MTS Street Z4 E85 E86 Inox
- Manufacturer: MTS Technik
- Article number: XMTSGWBM113
- EAN: 5903855624702
- Version: Street, Inox (stainless steel)
- Lowering: front 40 to 85 mm, rear 15 to 65 mm
- Springs (Eibach): GWFE96 with 60 N/mm front, GWFE06HA with 46 to 90.1 N/mm rear
- Helper springs: GWHE02 (20 N/mm)
- Height adjustment: front via threaded damper body, rear via separate adjuster element
- Camber plates: included at the front
- Included: complete front and rear set with springs and height adjustment, plus front camber plates
- TÜV certificate: no
- Weight: 24.9 kg
- Warranty: 2 years with no mileage limit
Fitting and delivery
The MTS Street Z4 E85 E86 Inox replaces the original dampers and springs and fits on the original mounting points.
- The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
- When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
- Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
- Sometimes extra original parts are needed for fitting; these are not included in the set.
- After fitting the MTS Street Z4 E85 E86 Inox, have the wheel alignment checked, because camber and toe change as well.
Delivery: 4 to 7 working days while manufacturer stock lasts.
The MTS Street Z4 E85 E86 Inox combines stainless steel damper bodies, Eibach springs of 60 and 46-90.1 N/mm and up to 85 mm of lowering for the BMW Z4 E85 and E86.
Why choose the MTS Street Z4 E85 E86 Inox?
With the MTS Street Z4 E85 E86 Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative. With the included camber plates you set the camber, which with a large lowering means less tyre wear and more grip.
Frequently asked questions
What is the difference between Street and Stance?
All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Street (60 and 46-90.1 N/mm) and Stance (70 and 260 N/mm). Street is the standard. Stance is the firmest and the lowest.
What is the difference between Gold and Inox?
Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.
How long does delivery take?
The MTS Street Z4 E85 E86 Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.
Other MTS Technik sets for the Z4 E85/E86
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.
EN
NL
FR
DE
Reviews
There are no reviews yet.