Shop

Description

Skoda Octavia IV NX with multi-link rear axle (from 2020) JOM BlueLine coilover kit, front axle load up to 1035 kg

The JOM coilover kit Octavia 4 multi-link 1035, part number 741244, is a vehicle-specific, height-adjustable BlueLine kit from German manufacturer JOM for the Skoda Octavia IV NX with multi-link rear axle. The front comes down by 20 to 55 mm, the rear by 30 to 55 mm.

Within the adjustment range of the Teilegutachten you decide how low the car sits, and the springs stay preloaded across that whole range. Threaded struts sit at the front; at the rear the kit uses a separate spring system.

Key benefits of the JOM coilover kit Octavia 4 multi-link 1035

• Vehicle-specific for the Skoda Octavia IV NX: not a universal kit but matched to this model.
• Lowering 20 to 55 mm front and 30 to 55 mm rear: within the range of the Teilegutachten.
• Adjustable when fitted: no need to remove the kit to change the height.
• Preloaded springs: the preload is kept across the whole adjustment range.
• Cold-wound springs: finished with EPS powder coating.
• High lateral load capacity: built for strong cornering forces.
• §19.3 Teilegutachten (TÜV): the German certificate comes with the kit.
• GOCA certificate for Belgium: can be requested when ordering, for €9.99 extra.

Suitable for

Skoda Octavia IV (NX) / Octavia IV Combi

• Model years: from 2020
• Engines: 1.0 TSI, 1.5 TSI, 2.0 TDI
• Only for cars with a multi-link rear axle.
• Intended for cars with a permitted front axle load up to 1035 kg (see the registration document).
• Not sure about the fitment? Please get in touch with us.

Technical specifications of the JOM coilover kit Octavia 4 multi-link 1035

• Manufacturer: JOM Car Parts & Car Hifi GmbH (Bochum)
• Series: BlueLine
• Part number: 741244
• EAN: 4048961116046
• Design: threaded front struts, spring system at the rear
• Front lowering: 20 to 55 mm
• Rear lowering: 30 to 55 mm
• Maximum front axle load: 1035 kg
• Maximum rear axle load: 980 kg
• Springs: cold-wound, EPS powder-coated
• Certification: §19.3 Teilegutachten (TÜV, Germany)
• Net kit weight (JOM figure): 22.4 kg

Fitting and delivery of the JOM coilover kit Octavia 4 multi-link 1035

You fit the kit to the original mounting points; it replaces the standard springs and shock absorbers. After fitting, set the height you want. Have the wheel alignment done afterwards, as camber and toe change with ride height. In Germany the kit is registered after fitting using the Teilegutachten. For the vehicle inspection in Belgium you can request a GOCA certificate when ordering (+ €9.99). Other countries have their own rules for lowered cars. The delivery time for the JOM coilover kit Octavia 4 multi-link 1035 is 4 to 7 days, as long as JOM has the kit in stock. If the kit is temporarily unavailable, the delivery time shows ‘Ask for delivery time’; please contact us for the current delivery time.

For the Skoda Octavia IV NX, JOM supplies BlueLine coilover kit 741244, with lowering of 20 to 55 mm front and 30 to 55 mm rear and a §19.3 Teilegutachten.

Why choose this JOM coilover kit Octavia 4 multi-link 1035?

You get a kit matched to this model, with a German certificate and a fixed adjustment range. That makes the JOM BlueLine series a logical choice if you want your Skoda Octavia IV NX lower without gambling on universal parts. See also our other coilover kits and all JOM parts.

Other JOM BlueLine coilover kits for the Skoda Octavia IV NX

Besides the JOM coilover kit Octavia 4 multi-link 1035, JOM makes more kits for this model. Choose the kit that matches the engine, version and axle load of your car:

• Skoda Octavia IV NX with torsion beam (from 2020) JOM BlueLine coilover kit, front axle load up to 1035 kg (part number 741236)
• Skoda Octavia IV NX with torsion beam (from 2020) JOM BlueLine coilover kit, front axle load up to 1100 kg (part number 741240)
• Skoda Octavia IV NX with multi-link rear axle (from 2020) JOM BlueLine coilover kit, front axle load up to 1100 kg (part number 741248)

Downloads and documentation

• Teilegutachten §19.3 (TÜV parts certificate, German, PDF)

Frequently asked questions

Does the JOM coilover kit Octavia 4 multi-link 1035 fit my Skoda Octavia IV NX?

This kit is intended for the Skoda Octavia IV (NX) / Octavia IV Combi, model years from 2020. Only for cars with a multi-link rear axle. Intended for cars with a permitted front axle load up to 1035 kg (see the registration document). If in doubt, please get in touch with us.

How much can I lower my Skoda Octavia IV NX with this kit?

The front comes down by 20 to 55 mm, the rear by 30 to 55 mm. You set the height with the kit fitted.

Is a certificate included?

Yes, this kit comes with a German §19.3 Teilegutachten (TÜV); you will also find it above under downloads. In Germany it is used to register the kit after fitting. Other countries have their own rules; check them before you drive the lowered car on public roads.

Can I request a GOCA certificate?

Yes. Tick the GOCA certificate box when ordering; it costs €9.99 extra. The certificate is intended for the vehicle inspection in Belgium.

Can I use this kit on a car with more power than standard?

Yes. The kit is chosen by model, version and axle load, not by engine power. As long as the axle load stays within the values of the kit, it also suits a car with more power than standard. For registration, check which engines are listed in the Teilegutachten.

What is the delivery time for the JOM coilover kit Octavia 4 multi-link 1035?

The delivery time for the JOM coilover kit Octavia 4 multi-link 1035 is 4 to 7 days, as long as JOM has the kit in stock. If JOM temporarily cannot supply the kit, the delivery time shows ‘Ask for delivery time’. In that case, please contact us and we will find out the current delivery time for you.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.