Shop

Description

Nissan 350Z Z33 VQ35HR (07-09) Mishimoto baffled oil catch can system

The Mishimoto catch can 350Z 07-09 system protects the VQ35HR engine of the 2007-2009 Nissan 350Z (Z33) against blow-by. The high-revving, high-compression HR is built to be driven at the limit, but as it ages more oil vapour finds its way into the intake. More blow-by means a lower effective octane and a higher risk of detonation.

This kit uses two 6061 aluminium catch cans plumbed into both the PCV and the CCV systems, protecting the engine from idle to wide-open throttle. Sturdy 3 mm thick steel brackets withstand rough roads and track use, pre-molded stock-style hoses keep installation simple and an aluminium T-connector lets the kit work with an aftermarket intake. Filters and cans are fully serviceable.

Key benefits

• Direct fit for the 2007-2009 Nissan 350Z with VQ35HR
• Two cans capture blow-by from both PCV and CCV
• 3 mm steel brackets for street and track
• Helps prevent detonation by keeping oil out of the intake charge
• Pre-molded hoses in stock style
• Aluminium T-connector for use with an aftermarket intake
• Fully serviceable filters and cans
• Mishimoto Lifetime Warranty

Suitable for

Nissan 350Z (Z33) with VQ35HR

• Model years 2007 to 2009
• Works with the stock intake and, via the included T-connector, with aftermarket intakes

Technical specifications

• Manufacturer: Mishimoto
• Part number: MMBCC-350Z-07PBE
• Cans: 6061 aluminium, black anodised, baffled
• Brackets: steel, 3 mm thick
• Clamp torque: 2.5 Nm recommended, 3 Nm maximum
• Included: 2 black anodised catch cans, 4 mounting brackets, 5 black pre-molded hoses, 1 aluminium T-fitting, 11 worm-gear clamps, 4 CNC-machined aluminium barbed fittings, mounting hardware

Installation and delivery

The cans mount in the engine bay with the specific brackets and are plumbed into the PCV and CCV systems with the pre-molded hoses. Mishimoto rates the installation as easy. Tighten the clamps to 2.5 Nm and no more than 3 Nm. Check the cans every 1,600 km at first; the level must not rise above the internal baffle. The Mishimoto installation guide is available below. Lead time: 4 to 7 days.

A high-revving VQ35HR deserves clean intake air: two catch cans that trap blow-by from idle to redline.

Why choose this Mishimoto catch can 350Z 07-09 system?

Many catch can kits only cover the PCV side. This Mishimoto kit also covers the CCV side and so protects the VQ35HR across the entire rev range. With sturdy steel brackets, pre-molded hoses and the Mishimoto lifetime warranty it is an upgrade for any 350Z that regularly sees high revs.

Frequently asked questions

Does this kit cover both ventilation circuits?

Yes. The Mishimoto catch can 350Z 07-09 system has two cans and captures blow-by from both the PCV and CCV systems.

Does the kit work with an aftermarket intake?

Yes, an aluminium T-connector is included for use with an aftermarket intake.

Does this kit fit a 2005 350Z?

No, this kit is for the 2007-2009 350Z with the VQ35HR.

What is the lead time?

The lead time is 4 to 7 days.

Downloads and documentation

Installation guide Mishimoto catch can 350Z (PDF, English)

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.