Shop

Description

Toyota GT86 / Subaru BRZ Mishimoto wheel spacers 5×100 50 mm black (pair)

The Mishimoto spacers 5×100 50mm are hub-centric wheel spacers 50 mm thick, supplied as a pair. Mishimoto lists them as a direct fit for the 2012-2020 Subaru BRZ and other Subaru models, and for any vehicle with a 5×100 bolt pattern, 56.1 mm centre bore and M12 x 1.25 studs, such as the Toyota GT86.

At 50 mm per side this is the widest size in this range, intended for a much wider track, for example under wide fenders or overfenders. Each spacer is forged from 6061-T6 aluminium and forms a direct extension of the hub, so the wheel stays precisely centred and the hardware carries less load. The pre-installed studs and included lug nuts are grade 12.9 steel.

Key benefits

• 50 mm of track width per wheel
• Hub-centric for exact wheel centring
• Forged 6061-T6 aluminium: light and strong
• Grade 12.9 steel studs and nuts
• Black anodised against corrosion
• Pair with all installation hardware
• Mishimoto Lifetime Warranty

Suitable for

5×100 bolt pattern, 56.1 mm centre bore, M12 x 1.25

• Subaru BRZ, model years 2012 to 2020, and other Subaru models with these dimensions (Mishimoto)
• Toyota GT86 and any other vehicle with a 5×100 bolt pattern, 56.1 mm centre bore and M12 x 1.25 studs
• Confirm fitment with aftermarket wheels yourself before ordering

Technical specifications

• Manufacturer: Mishimoto
• Part number: MMWS-008-500BK
• Thickness: 50 mm per spacer
• Bolt pattern: 5×100
• Centre bore: 56.1 mm, hub-centric
• Thread: M12 x 1.25
• Material: forged 6061-T6 aluminium, black anodised
• Studs and nuts: grade 12.9 steel, studs pre-installed
• Included: 2 aluminium wheel spacers, 10 M12 x 1.25 lug nuts

Installation and delivery

Mishimoto rates installation as easy. Remove corrosion from the hub so the spacer seats flat. Make sure the stock studs do not touch the back of the wheel; trimming may be required. The lug nuts must engage for at least 8 full turns before reaching full torque, otherwise do not use them. Mishimoto recommends an alignment after installation because the track width changes. The installation guide (in English) is linked below. Lead time: 4 to 7 days.

50 mm extra per side: the widest step for a wide stance.

Why choose these Mishimoto spacers 5×100 50mm?

Wheel spacers create brake clearance, add track width, prevent tyre rub and give ideal wheel fitment. Mishimoto makes them forged, hub-centric and with grade 12.9 hardware, and backs them with a lifetime warranty.

Frequently asked questions

Which cars do these spacers fit?

According to Mishimoto, the Mishimoto spacers 5×100 50mm fit the 2012-2020 Subaru BRZ and any vehicle with a 5×100 bolt pattern, 56.1 mm centre bore and M12 x 1.25 studs, such as the Toyota GT86.

How many are in the set?

Two spacers with pre-installed studs and ten M12 x 1.25 lug nuts: enough for one axle.

Does the car need an alignment afterwards?

Mishimoto recommends an alignment after installation because the track width changes.

What is the lead time?

The lead time is 4 to 7 days.

Downloads and documentation

Mishimoto wheel spacer installation guide (PDF, English)

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.