Description
Mazda RX-8 (04-08) Mishimoto stainless oil cooler line kit, 4 lines
The Mishimoto oil lines RX-8 kit is a complete set of four stainless braided oil cooler lines for the 2004 to 2008 Mazda RX-8. It replaces all stock rubber lines with steel fittings between the engine and the two stock oil coolers in the front bumper.

Those stock lines corrode over time, especially due to dirt and road salt, and a leaking oil line is fatal for a rotary. The pre-made Mishimoto lines have aluminium -10AN fittings, M18 banjo bolts and Dowty seals, and come prelabelled so you can see straight away which line goes where.
Key benefits
- Complete set of four lines for both oil coolers
- Stainless braided instead of corrosion-prone rubber
- Aluminium -10AN fittings that do not rust
- M18 banjo bolts and straight fittings for the stock oil coolers
- Prelabelled lines for error-free installation
- Dowty seals included
- Mishimoto Lifetime Warranty
Suitable for
Mazda RX-8 (SE3P / FE3P), 2004-2008
- Mazda RX-8, model years 2004 to 2008 according to Mishimoto
- For the stock oil coolers in the front bumper
- Engine 13B-MSP rotary
Technical specifications
- Manufacturer: Mishimoto
- Product: Mishimoto oil lines RX-8
- Part number: MMSBH-RX8-04K
- Lines: stainless braided, -10AN, CPE rubber inner layer
- Operating temperature: -40 to 149 °C, pressure rating up to 69 bar (Mishimoto figure)
- Torque for fittings and banjo bolts: 20 to 34 Nm, maximum 47 Nm
- Included: 71 cm line with 90 degree -10AN fittings, 142 cm line with 90 degree -10AN fittings, 102 cm line with 45 degree and straight -10AN fitting, 66 cm line with 90 degree and straight -10AN fitting, M18 x -10AN fittings with Dowty seals, M18 x -10AN banjo bolts with Dowty seals, -10AN to -10AN male connector
Installation and delivery
Mishimoto rates the installation as hard. The lines connect to the stock oil coolers in the front bumper. Observe the torque values, check the oil level after installation and top up if needed. Check all connections for leaks after the first miles. Delivery time: 4 to 7 days.
Four lines, zero rubber: reliable oil cooling for your RX-8 again.
Why choose this Mishimoto oil lines RX-8?
With a rotary, a reliable oil supply is vital. This kit replaces all corrosion-prone oil cooler lines at once with stainless braided lines and aluminium fittings. Backed by the Mishimoto Lifetime Warranty.
Frequently asked questions
What is the difference with the single primary oil line?
The Mishimoto oil lines RX-8 kit replaces all four oil cooler lines. The single primary line only replaces the left-hand line that corrodes most often.
Does the kit work with the stock oil coolers?
Yes, the kit is designed for the stock oil coolers in the front bumper, with matching M18 banjo bolts and fittings.
Is installation difficult?
Mishimoto rates the installation as hard. If in doubt, have a specialist do it.
What is the delivery time?
The delivery time for this Mishimoto oil lines RX-8 is 4 to 7 days.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.









Reviews
There are no reviews yet.