Description
Mishimoto universal -10AN hose with fittings 0.91 m (3 ft) straight and 90 degree black nylon
The Mishimoto -10AN hose with fittings 3 ft is a ready-to-fit braided hose of 0.91 m. One end carries a straight and the other a 90 degree -10AN swivel fitting, both pre-assembled. No cutting or crimping required: connect, tighten and go.

The hose has a CPE rubber core, a woven stainless steel inner jacket for extra pressure resistance and a black nylon outer braid that will not abrade plastic or aluminium in tight spaces. It handles up to 69 bar (1000 psi) and works from -23 °C to 150 °C, ideal for an oil cooler system or a turbo oil drain.
Key benefits
- Ready to fit: straight and 90 degree -10AN fittings pre-assembled
- Swivel nuts, so the hose does not twist while tightening
- CPE rubber core for petrol, diesel, engine oil and coolant
- Woven stainless steel jacket for high pressure resistance
- Up to 69 bar (1000 psi) working pressure
- Black nylon outer braid does not damage plastic or aluminium
- Mishimoto Lifetime Warranty from the manufacturer
Suitable for
Universal for -10AN lines
- Oil cooler lines between engine and oil cooler
- Turbo oil drain
- Fuel and coolant lines with -10AN connections
- A -10AN connection on both ends: one straight, one at 90 degrees
Technical specifications
- Manufacturer: Mishimoto
- Product: Mishimoto -10AN hose with fittings 3 ft
- Part number: MMSBH-10-3NBK
- Length: 0.91 m (3 ft)
- Connections: -10AN, one straight and one 90 degree swivel fitting
- Inner core: CPE rubber
- Outer braid: black nylon over woven stainless steel inner jacket
- Maximum pressure: 69 bar (1000 psi)
- Temperature range: -23 °C to 150 °C
- Compatible fluids: petroleum-based fuels, engine oil and coolant
- Included: 1 pre-assembled -10AN hose
Installation and delivery
Mishimoto rates the installation as easy. Hand-tighten the nuts first and then secure them with a suitable spanner. Route the hose away from sharp edges and hot exhaust parts, and check that everything stays dry after the first drive. Lead time: 4 to 7 days.
A -10AN hose with both fittings already assembled: connect, tighten and drive.
Why choose this -10AN hose with fittings 3 ft?
Because the fittings are already assembled, you need no hose cutters or assembly tools and you can be sure the connection seals properly. The 0.91 m hose leaves enough room for neat routing through the engine bay. Mishimoto backs it with the Mishimoto Lifetime Warranty.
Frequently asked questions
Do I need to assemble the fittings myself?
No. The -10AN hose with fittings 3 ft comes pre-assembled with a straight and a 90 degree -10AN swivel fitting.
Can the hose touch plastic or aluminium parts?
Yes. According to Mishimoto the nylon outer braid does not abrade soft materials such as plastic or aluminium.
Which fluids can run through the hose?
According to Mishimoto the CPE core is suitable for petroleum-based fuels, diesel, engine oil and coolant.
What is the lead time?
The lead time for this -10AN hose with fittings 3 ft is 4 to 7 days.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.









Reviews
There are no reviews yet.