Description
Adamat Toyota 1JZ/2JZ steel rear sump oil pan for swaps
This 1JZ 2JZ rear sump oil pan from Adamat Performance is a steel oil pan for the Toyota 1JZ and 2JZ in GE and GTE versions, with the deep section at the rear. In a swap, the original oil pan can get in the way of the front axle or the subframe; with this oil pan you get a different layout under the block.
Adamat makes the oil pan from weldable structural steel with increased strength. The pickup tube is welded firmly into the oil pan, so it cannot come loose or shift. The oil pan locates on the original dowel pins of the block and therefore sits in the right position straight away.
Key advantages
- Deep section at the rear, intended for 1JZ and 2JZ swaps
- Sturdy structural steel that is easy to weld, with increased strength
- Welded-in pickup tube that stays in place
- Positioning on the original dowel pins of the engine block
- Removable cover on the deep section
- New bolts for mounting to the block and complete fasteners for the cover
Suitable for
Engine: Toyota 1JZ-GE, 1JZ-GTE, 2JZ-GE and 2JZ-GTE
The oil pan is not tied to a specific gearbox. Whether it fits in your chassis depends on the space around your front axle and subframe. Therefore compare the dimension drawing in the photo gallery with the space in your car. You can enter details about your swap in the note field when ordering.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Article number: ADM-114
- Engine: Toyota 1JZ and 2JZ, GE and GTE
- Material: weldable structural steel with increased strength
- Pickup tube: welded firmly into the oil pan
- Dimensions according to Adamat’s drawing: 129 mm deep, deep section 312 mm long (330 mm including flange)
- Included: oil pan, new bolts for the block, bolts, nuts and washers for the cover
Installation and delivery
The oil pan is placed on the original dowel pins of the block. Adamat advises fitting the oil pan with liquid gasket, for example from Victor Reinz. This gasket is not included in the set.
When ordering, there is a note field for the manufacturer, for example for your chassis, the engine code or a different engine tilt. Adamat makes the oil pan to order. The lead time is 5 to 7 weeks.
A steel oil pan that locates on the original dowel pins, with a pickup tube that can no longer come loose.
Why choose this 1JZ 2JZ rear sump oil pan?
Adamat Performance has been building parts for engine swaps and motorsport for more than 15 years, including adapters and clutches for the JZ engines. This oil pan comes from the same practice: it is welded from sturdy steel, fits the fixed points of the block and is supplied with new fasteners.
Frequently asked questions
Which engines does this 1JZ 2JZ rear sump oil pan fit?
This 1JZ 2JZ rear sump oil pan is made for the Toyota 1JZ-GE, 1JZ-GTE, 2JZ-GE and 2JZ-GTE.
Is a gasket included?
No. Adamat advises liquid gasket, for example from Victor Reinz. The bolts for the block and the cover are included in the set.
Does the oil pan fit my car?
That depends on your chassis and the space around the front axle. Check the dimension drawing in the gallery and enter your chassis in the note field when ordering if you want Adamat to take a look.
What is the lead time?
Adamat makes the oil pan to order. Allow 5 to 7 weeks.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.












Reviews
There are no reviews yet.