Description
Adamat BMW V8 M60/M62/S62 swap oil sump with engine mounts for E36, E46 and Z3
With this V8 swap oil sump from Adamat Performance, you can fit a BMW V8 from the M60, M62 or S62 family into an E36, E46 or Z3. The set consists of a special oil sump, engine mounts, a universal gearbox mount and all parts to modify the engine crossmember and the oil pump.
The sump (2018 model) keeps the engine crossmember with the steering column in its original position and places the engine as close as possible to the bulkhead. As a result, the engine fits under the original bonnet and the car looks original from the outside. The sump can also be used in an E30, for projects where the engine sits 20 cm further back.
When ordering, enter your chassis, engine code and gearbox in the note field so that Adamat can take them into account.
Key benefits
- Complete swap set: oil sump, engine mounts, gearbox mount, plates for the engine crossmember and parts for the oil pump
- Engine under the original bonnet, without modifying the bonnet
- Baffle and sloped oil chamber, so the pickup pipe always stays under oil
- Laser-cut steel plate, continuously MAG-welded by a certified welder on an in-house jig
- Every sump leak-tested at the welds
- Height adjustable with spacer rings under the mounts
- Air conditioning remains possible with a small modification to the original bracket
- Room for a compressor in the engine bay
- Black powder-coated as standard
Suitable for
| Component | Suitable for |
|---|---|
| Engine | BMW M60 and M62 (all displacements), S62 and their Alpina versions |
| Chassis | BMW E36, E46 and Z3 |
| Also usable in | BMW E30, if the engine sits 20 cm further back |
| Gearbox mount | manual gearboxes from BMW V8 engines and from the six-cylinder M50, M52, M54 and M57 |
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Article number: ADM-E36-V8SUMP
- Material: structural steel plate, laser-cut and continuously MAG-welded
- Finish: black powder-coated
- Sump: 2018 model with baffle and sloped oil chamber, every sump leak-tested
- Included: oil sump, engine mounts, parts for a universal gearbox mount (matched to the exhaust routing), plates to modify the engine crossmember, spacer bushes between engine crossmember and body (E36 only), spacer rings for the height, parts to modify the oil pump, cover plate for flywheel and gearbox with a hole to lock the crankshaft when setting the timing, cover for the starter motor hole and an illustrated installation manual
- Not included: oil pump from the M60/M62, required for an S62
Installation and delivery
The set comes with a manual with photos and explanations of all modifications to the engine and body. In the E36, the spacer bushes between the engine crossmember and the body ensure that the engine fits under the original bonnet. If you use the E46 power steering pump and relocate the steering shaft mounting, the engine can go another 3 cm further back and you do not need the bushes.
If you are installing an S62, you need an oil pump from the M60 or M62; it is not included in the set. The lead time is 5 to 7 weeks.
A BMW V8 in an E36, E46 or Z3, under the original bonnet and with the steering column in its original place.
Why choose this V8 swap oil sump?
Adamat Performance has more than 15 years of experience with engine swaps and keeps improving the production process of this set. You get not only a sump, but also the mounts, the gearbox mount, the parts for the engine crossmember and oil pump and a manual with photos. The original engine crossmember and steering column continue to be used, which keeps the swap straightforward.
Frequently asked questions
Does the set fit my E36, E46 or Z3?
Yes, the V8 swap oil sump is made for the E36, E46 and Z3. You can also use the sump in an E30 if the engine sits 20 cm further back.
Can I also install an S62 with it?
Yes. For the S62 you do need an oil pump from the M60 or M62. The parts to modify the oil pump are included in the set, the pump itself is not.
Does the bonnet have to be modified?
No. The engine sits as close as possible to the bulkhead and fits under the original bonnet. In the E36 you use the supplied spacer bushes for this.
Can I pass on any details when ordering?
Yes, there is a note field. Enter your chassis, engine code, gearbox or other requirements there and we will pass this on to Adamat.
What is the lead time?
Allow 5 to 7 weeks.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.














Reviews
There are no reviews yet.