Description
Adamat Toyota 1UZ/3UZ-FE conversion kit with clutch STAGE1 650 Nm for BMW S5D, GS5 and GS6
This Toyota 1UZ conversion kit from Adamat Performance connects a Toyota 1UZ-FE or 3UZ-FE V8 to a manual BMW gearbox. The set contains an adapter plate, a light CNC-machined flywheel, a clutch disc with LUK 8090S Kevlar lining, a SACHS pressure plate and a release bearing. The STAGE1 version is made for engines up to 650 Nm.
When ordering, you choose which BMW gearbox you use, from the S5D 5-speed from the E30, E36 and E46 to the GS6-53BZ from the N54 models. Adamat matches the adapter and the spline of the clutch disc to it. If the manufacturer needs to know anything else, such as your chassis or a different engine tilt, enter it in the note field.
With a single clutch disc, this is a simple and strong basis for getting a UZ swap on the road, the drift track or the circuit, as long as the engine stays below 650 Nm.
Key advantages
- Everything for the connection in one set: adapter plate, flywheel, clutch disc, pressure plate, release bearing and bolts
- Adapter plate made of AW-2017A duralumin, sturdy yet light
- 6.4 kg flywheel made of the light aerospace alloy AlZnMg+Ti, CNC-machined and fitted with a starter ring gear
- Flywheel that acts as a heat sink: the alloy quickly dissipates the heat from the replaceable cast iron friction surface, so it is less prone to distortion than a steel flywheel
- Stiff 240 mm clutch disc with LUK 8090S lining with Kevlar
- SACHS pressure plate with SAC mechanism that automatically adjusts for disc wear
- Dynamically balanced as a complete clutch
- Class 12.9 flywheel bolts plus the bolts for adapter and gearbox
Suitable for
Engine: Toyota 1UZ-FE and 3UZ-FE V8
Gearbox: manual BMW gearboxes
| BMW gearbox | From chassis | Original engine | Input shaft |
|---|---|---|---|
| GS6-53BZ (6-speed, also xDrive GS6X53BZ) | E82, E90-E93, E60-E64 | N54 | 32,5×35-26N |
| GS6-53DZ (6-speed, also xDrive GS6X53DZ) | E46, E82, E90-E93, E60-E64 | M57N, M57N2 | 32,5×35-26N |
| GS6-37BZ (6-speed, also xDrive GS6X37BZ) | E46, E39, E85, E86, E81, E87, E90, E91, E60, E61 | N52, M54 | 23,13×29,13-22N |
| GS6-37DZ (6-speed, also xDrive GS6X37DZ) | E46, E39, E85, E86, E81, E87, E90, E91, E60, E61 | M47, M47N, M47N2, N47, N47N2 | 23,13×29,13-22N |
| GS5-39DZ (5-speed) | E46, E39 | M57 | 28×35-10N |
| S5D-320Z, S5D-310Z, S5D-260Z (5-speed) | E30, E36, E34, E39, E38, E46 | M50, M52, S50, S52 | 23×29-10N |
If your gearbox is not listed, choose “Other gearbox” and enter the code in the note field. We will then check with Adamat what is possible.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Article number: ADM-137
- Engine: Toyota 1UZ-FE and 3UZ-FE
- Maximum torque: 650 Nm (STAGE1)
- Adapter plate: AW-2017A duralumin
- Flywheel: single-mass, AlZnMg+Ti, CNC-machined, 6.4 kg, with starter ring gear and replaceable cast iron friction surface
- Clutch disc: 1x 240 mm, stiff, LUK 8090S lining with Kevlar
- Pressure plate: SACHS with SAC mechanism
- Pilot bearing: depending on the gearbox in the flywheel, or a centring pin for the bearing in the input shaft
- Bolts: class 12.9 flywheel bolts, bolts for adapter and gearbox
- Included: adapter plate, flywheel with starter ring gear, clutch disc, pressure plate, release bearing and bolts
Installation and delivery
The set is dynamically balanced as a complete clutch, so flywheel and pressure plate run smoothly together. Depending on your gearbox, the pilot bearing sits in the flywheel or you receive a centring pin for the bearing in the input shaft.
Choose your gearbox when ordering, and Adamat will make the set to fit it. Enter details about your car or engine in the note field. Adamat makes the set to order. The lead time is 5 to 7 weeks.
One strong clutch disc, a light flywheel and an adapter made to fit your BMW gearbox: that is how you connect a 1UZ V8 to it, tight and solid.
Why choose this Toyota 1UZ conversion kit?
Adamat Performance builds clutches that hold up in tough conditions and in street projects. Adamat has tested the light AlZnMg+Ti flywheel against a traditional steel flywheel: the light alloy dissipates heat better, while steel can distort when overheated. Because adapter, flywheel and clutch come from one manufacturer, everything fits together and you do not have to source parts yourself.
Frequently asked questions
Which BMW gearboxes does this set fit?
All gearboxes in the table above. You choose your gearbox when ordering. If it is not listed, choose “Other gearbox” and state the code in the note field.
Does this Toyota 1UZ conversion kit also fit a 3UZ-FE?
Yes, this Toyota 1UZ conversion kit is made for both the 1UZ-FE and the 3UZ-FE.
My engine produces more than 650 Nm. What now?
This set is made for a maximum of 650 Nm. If your engine produces more, choose an Adamat kit with a twin-disc clutch. Feel free to contact us and we will find the right set together.
What is included in the set?
Adapter plate with bolts, flywheel with starter ring gear, a 240 mm clutch disc, SACHS pressure plate, release bearing and class 12.9 flywheel bolts.
What is the lead time?
Adamat makes the set to order for your gearbox. Allow 5 to 7 weeks.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.















Reviews
There are no reviews yet.