Description
Adamat BMW N62/N62N V8 adapter plate for BMW S5D/GS5/GS6
This N62 manual gearbox adapter from Adamat Performance is the standalone adapter plate that lets you mate a BMW N62 or N62N V8 to a manual BMW gearbox. The plate is machined from duralumin 2017A and is supplied with the bolts for gearbox and adapter.
The adapter has a mounting hole for the crankshaft sensor. On the N62 this sensor was located in the gearbox from the factory, so with this plate it has a fixed place again: you mount it directly in the adapter.
If you already have a flywheel and clutch, or want to put them together yourself, this standalone plate is the basis of your swap. The flywheel must have a trigger for the crankshaft sensor. If you are looking for everything in one go, take a look at the Adamat conversion kit for the N62 with flywheel.
Main advantages
- Standalone adapter plate for those who choose their own flywheel and clutch
- Mounting hole for the crankshaft sensor in the plate
- Duralumin 2017A, CNC-machined
- Six configurations: from the S5D 5-speed to the GS6-37 and GS6-53, also for xDrive gearboxes
- Bolts for gearbox and adapter included
- For the N62 and the N62N
Fits
Engine: BMW N62 and N62N V8
Gearbox: manual BMW gearboxes
| BMW gearbox | From chassis | Original engine | Input shaft |
|---|---|---|---|
| GS6-53BZ and xDrive GS6X53BZ (6-speed) | E82, E90-E93, E60-E64 | N54 | 32,5×35-26N |
| GS6-53DZ HGU, HGD, HGA, HGK, JGL, JGG and xDrive GS6X53DZ (6-speed) | E46, E82, E90-E93, E60-E64 | M57N, M57N2, N47S | 32,5×35-26N |
| GS6-37BZ and xDrive GS6X37BZ (6-speed) | E46, E39, E85, E86, E81, E87, E90, E91, E60, E61 | N52, M54 | 23,13×29,13-22N |
| GS6-37DZ and xDrive GS6X37DZ (6-speed) | E46, E39, E85, E86, E81, E87, E90, E91, E60, E61 | M47, M47N, M47N2, N47, N47N2 | 23,13×29,13-22N |
| GS5-39DZ (5-speed) | E46, E39 | M57 | 28×35-10N |
| S5D-320Z, S5D-310Z, S5D-260Z (5-speed) | E30, E36, E34, E39, E38, E46 | M50, M52, S50, S52 | 23×29-10N |
The input shaft determines which clutch disc you need with it. If your gearbox has xDrive, please mention this in the note field. If your gearbox is not listed, choose “Other gearbox” and enter the code in the note field. We will then check with Adamat what is possible.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Part number: BMV8-ADP1-3
- Engine: BMW N62 and N62N (V8)
- Material: duralumin 2017A, CNC-machined
- Crankshaft sensor: mounting hole in the adapter
- Included: adapter plate and bolts for gearbox and adapter
- Not included: flywheel, clutch and release bearing
Installation and delivery
Choose your gearbox when ordering, and Adamat will make the adapter in the configuration for that gearbox. You screw the crankshaft sensor of your N62 into the mounting hole of the plate. If you have an xDrive gearbox, a different engine tilt or another special requirement, please put that in the note field.
Adamat makes the adapter plate to order. The lead time is 5 to 7 weeks.
The basis of your N62 swap: one plate between V8 and manual gearbox, with a fixed place for the crankshaft sensor.
Why choose this N62 manual gearbox adapter?
Anyone building a V8 swap step by step often wants to decide which flywheel and which clutch go on it. With this standalone plate from Adamat you have the trickiest step covered: the right connection between the N62 block and the BMW gearbox, with the crankshaft sensor in a fixed place. Because Adamat also makes flywheels and clutches for the N62, you can later complete everything from the same system.
Frequently asked questions
Does this N62 manual gearbox adapter come with a flywheel?
No, this N62 manual gearbox adapter is the standalone adapter plate with bolts. Flywheel, clutch and release bearing are purchased separately. The flywheel must have a trigger for the crankshaft sensor.
Where does the crankshaft sensor go?
The adapter plate has a mounting hole for the crankshaft sensor. You mount the sensor directly in the plate.
Which gearbox do I choose when ordering?
You choose the code of your gearbox, from the S5D-320Z to the GS6-37DZ and GS6-53DZ. If your gearbox is not listed, choose “Other gearbox” and state the code in the note field.
What is the lead time?
Adamat makes the adapter plate to order for your gearbox. Allow 5 to 7 weeks.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.










Reviews
There are no reviews yet.