Description
Adamat polyurethane engine and gearbox mounts for swaps (BMW R6/V8, Toyota JZ)
This set of PU swap engine mounts from Adamat Performance is put together for cars that have a different engine than the one fitted at the factory. Adamat uses these polyurethane mounts in its own swap projects, and they have been tested by its customers. The set contains engine mounts and gearbox mounts, so engine and gearbox sit on new mounts in one go.
The engine mounts are eccentric and 55 mm high. They are used with BMW six-cylinder engines, BMW V8 engines and the Toyota 1JZ and 2JZ. According to Adamat, the gearbox mounts fit every BMW gearbox.
When ordering, you choose the hardness: 75 ShA for a car you use on the road, or 85 ShA for a track car or a car with more than 400 hp.
Key advantages
- Engine and gearbox mounts in one set, so you do not need to source anything separately
- Tested in swaps: Adamat uses them itself and its customers drive with them
- Eccentric engine mounts, 55 mm high
- Widely usable: BMW M50, M52, M54, S50, S52, S54, BMW V8 M60, M62, S62, N62 and Toyota 1JZ and 2JZ
- Gearbox mounts for every BMW gearbox
- Two hardnesses: 75 ShA for the road, 85 ShA for the track and outputs from 400 hp
- Polyurethane instead of rubber: stiffer, so engine and gearbox move less under hard acceleration and gear changes
Suitable for
Engine mounts (eccentric, 55 mm):
| Engine family | Engine codes |
|---|---|
| BMW inline six-cylinder | M50, M52, M54, S50, S52, S54 |
| BMW V8 | M60, M62, S62, N62 |
| Toyota JZ | 1JZ-GE, 1JZ-GTE, 2JZ-GE, 2JZ-GTE |
Gearbox mounts: suitable for every BMW gearbox.
Adamat does not specify a fixed list of chassis. If you want to be sure the set suits your project, enter your engine, gearbox and chassis in the note field. We will then check with Adamat.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Part number: ADM-119
- Material: polyurethane
- Engine mounts: eccentric, height 55 mm
- Hardness: 75 ShA (road) or 85 ShA (track and 400 hp+)
- Contents: engine mounts and gearbox mounts
Fitting and delivery
The mounts go in place of the original engine and gearbox mounts. When ordering, choose the hardness that suits your use. If you are unsure about the fit in your car, or have a question for Adamat, use the note field. The lead time is 1 to 2 weeks.
Polyurethane engine and gearbox mounts that Adamat runs in its own swap cars, in a road or track hardness.
Why choose these PU swap engine mounts?
With a swap, the mounts often get more torque than the original rubbers are used to. Adamat has been building swap kits for BMW and Toyota for years and has tested these mounts in its own projects and with customers. You choose the hardness that suits your car: softer for the road or stiffer for the track and high power.
Frequently asked questions
Which hardness should I choose?
Adamat recommends 75 ShA for cars that are mainly driven on the road. For a track car or a car with more than 400 hp, 85 ShA is the recommended choice. You choose the hardness when ordering.
Which engines do these PU swap engine mounts fit?
These PU swap engine mounts are used with the BMW M50, M52, M54, S50, S52 and S54, the BMW V8 M60, M62, S62 and N62 and the Toyota 1JZ and 2JZ. The gearbox mounts fit every BMW gearbox.
Can I pass something on to the manufacturer?
Yes, there is a note field when ordering. Enter, for example, your engine, gearbox and chassis there, and we and Adamat will take it into account.
What is the lead time?
Allow 1 to 2 weeks.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.









Reviews
There are no reviews yet.