Adamat friction insert 240 mm for flywheel (SC and TC kits)

€56,81 Incl. VAT

Adamat friction insert 240 mm for flywheel (SC and TC kits)

Replacement 240 mm friction insert for the flywheels from the Adamat SC and TC clutch kits. Made of wear-resistant GJS600 nodular cast iron, nominal size 155 x 240 x 8 mm. After replacement, the flywheel must be dynamically balanced again. Lead time 1 to 2 weeks.

Available on back-order|Estimated delivery time: 1 to 2 weeks

SKU: ADM-125 Category: Brand:

Description

Adamat friction insert 240 mm for flywheel (SC and TC kits)

This flywheel friction insert from Adamat Performance is the replacement friction surface for the flywheels from the Adamat SC kits (single clutch) and TC kits (twin-disc clutch). The insert is the ring that the clutch disc runs against. If that ring is worn, you replace only the ring and the flywheel itself stays in use.

Adamat makes the insert from GJS600, a wear-resistant nodular cast iron. The nominal size is 155 x 240 x 8 mm, for the kits with a 240 mm clutch.

Please note: after replacing the insert, the flywheel must be dynamically balanced again. Adamat explicitly requires this.

Key benefits

  • Replace only the wear ring: the flywheel itself stays in service
  • GJS600 nodular cast iron, chosen for its high wear resistance
  • 240 mm diameter for Adamat’s SC and TC kits
  • Original Adamat part, made for their own flywheels
  • Nominal size 155 x 240 x 8 mm
  • New mounting bolts: Adamat offers the insert with new bolts
  • Quickly available: lead time 1 to 2 weeks

Suitable for

Flywheels from the Adamat SC kits (single clutch) and TC kits (twin-disc clutch) with a 240 mm clutch

If you are not sure whether your flywheel has this insert, please contact us before ordering.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Part number: ADM-FLY-INSERT
  • Material: GJS600 nodular cast iron, wear-resistant
  • Nominal size: 155 x 240 x 8 mm
  • Suitable for: Adamat SC and TC clutch kits of 240 mm
  • After installation: dynamically balance the flywheel again

Installation and delivery

The old insert comes off the flywheel and the new one is bolted in the same place. The flywheel must then be dynamically balanced again before the clutch goes back on. Take this into account in your planning.

The lead time is 1 to 2 weeks.

Worn friction surface? With a new ring and a new balancing, your Adamat flywheel is ready for service again.

Why choose this flywheel friction insert?

On an Adamat flywheel, only the cast iron ring serves as the friction surface. If it wears, it is a waste to buy a complete flywheel. With Adamat’s original insert you keep the same size and the same material as with the kit, so your clutch bears on the right surface again.

Frequently asked questions

Which flywheels does this flywheel friction insert fit?

The flywheel friction insert is made for the flywheels from the Adamat SC kits and TC kits with a 240 mm clutch.

Does the flywheel need to be balanced after replacement?

Yes. Adamat requires the flywheel to be dynamically balanced again after the insert has been replaced.

Are bolts included?

Adamat offers the insert with new mounting bolts. If you want to be sure what is included in your order, please get in touch with us.

What is the lead time?

Allow 1 to 2 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight2 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat friction insert 240 mm for flywheel (SC and TC kits)”
EN

Your Shopping cart

Close