Description
Adamat Nissan RB complete swap kit for BMW ZF 8HP45/50/70/75
With this RB swap kit BMW 8HP from Adamat Performance you connect a Nissan RB20, RB25, RB26 or RB30 to a BMW ZF 8HP automatic. The kit consists of an aluminium adapter plate, a one-piece flywheel with fitted ring gear and all bolts for the flywheel, adapter and gearbox.
This lets you combine Nissan’s well-known inline six with the eight-speed automatic that BMW uses behind engines such as the B58, S58, N57 and B47. Adamat supplies the kit for the 8HP45, 8HP50, 8HP51, 8HP70, 8HP75 and 8HP76.
When ordering, you choose which flywheel you want: the light flywheel up to 1200 Nm or the solid flywheel for drag racing with up to 2000 Nm. You can also have the aluminium parts anodised.
Key benefits
- Complete kit: adapter plate, flywheel with ring gear and bolts for the flywheel, adapter and gearbox
- Adapter plate made of AW7075-T651 aluminium, approximately 25 mm thick
- One-piece flywheel made of AlZnMg+Ti, a light alloy with the strength of 42CrMo4 steel
- Ring gear already fitted to the flywheel
- Two flywheel versions: light (approx. 3.1 kg, up to 1200 Nm) or solid (approx. 3.6 kg, up to 2000 Nm for drag)
- For all RB engines: RB20, RB25, RB26 and RB30
- Widely applicable to the ZF 8HP gearboxes from BMWs with petrol and diesel engines
- Fitting instructions available as a PDF
Suitable for
Engine: Nissan RB20, RB25, RB26 and RB30
Gearbox: BMW ZF 8HP automatic
| ZF 8HP gearbox | Code | Original BMW engine |
|---|---|---|
| 8HP70 | GA8HP70 | N57, N57N |
| 8HP75 | GA8HP75X | N57, N57N |
| 8HP50, 8HP50Z | GA8HP50Z | B58 |
| 8HP76, 8HP75Z | GA8HP76Z | S58 |
| 8HP75Z, 8HP75 | GA8HP75Z | B57 |
| 8HP51Z, 8HP51 | GA8HP51Z | B48, B46 |
| 8HP45Z | GA8HP45X | B47C/D20, N47 |
If your 8HP gearbox is not listed or you have a special setup, please mention it in the note field when ordering. We will check with Adamat what is possible.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Article number: RB-BZF8HP50-75
- Engine: Nissan RB20, RB25, RB26, RB30
- Gearbox: BMW ZF 8HP45, 8HP50, 8HP51, 8HP70, 8HP75, 8HP76
- Adapter plate: AW7075-T651 aluminium, approximately 25 mm thick
- Flywheel: one-piece, AlZnMg+Ti, with fitted ring gear
- Light flywheel: approx. 3.1 kg, up to 1200 Nm
- Solid flywheel: approx. 3.6 kg, up to 2000 Nm, for drag racing
- Included: adapter plate, flywheel with ring gear, bolts for flywheel, adapter and gearbox, fitting instructions (PDF)
Fitting and delivery
The adapter plate goes between the RB block and the 8HP gearbox, the flywheel goes on the crankshaft and all bolts are included in the kit. Fitting instructions are available as a PDF.
When ordering, you choose the light or the solid flywheel and whether you want the aluminium parts anodised. If you have a different requirement, such as your chassis or a different engine tilt, put it in the note field. Adamat makes the kit to order. The lead time is 5 to 7 weeks; if you choose anodising, allow approximately 2 extra weeks.
A Nissan RB behind a modern eight-speed ZF automatic: adapter, flywheel and bolts from one manufacturer, with a flywheel that matches your torque.
Why choose this RB swap kit BMW 8HP?
The ZF 8HP is fitted in many modern BMWs, from the B48 and B47 to the B58 and S58. With this kit you can put it behind an RB engine without having to design an adapter yourself. Adamat Performance has more than 15 years of experience in motorsport and makes the adapter and flywheel itself, so the parts match each other exactly.
Frequently asked questions
Which RB engines fit this kit?
The kit is made for the Nissan RB20, RB25, RB26 and RB30.
Which flywheel should I choose?
The light flywheel of approx. 3.1 kg goes up to 1200 Nm. The solid flywheel of approx. 3.6 kg is intended for drag racing with up to 2000 Nm. You choose the flywheel when ordering.
Does the RB swap kit BMW 8HP fit my 8HP gearbox?
The RB swap kit BMW 8HP is available for the gearboxes in the table above, from the 8HP45 to the 8HP76. If in doubt, put the code of your gearbox in the note field.
What else can I choose when ordering?
You can have the aluminium parts anodised. This is done externally and takes approximately 2 extra weeks. In the note field you can also pass on your chassis, engine code or a different engine tilt.
What is the lead time?
Adamat makes the kit to order. Allow 5 to 7 weeks, or approximately 2 weeks longer with anodising.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.












Reviews
There are no reviews yet.