Description
Adamat Toyota 1JZ/2JZ swap kit adapter + flywheel for BMW ZF 8HP45/8HP50/8HP70
With this JZ swap kit BMW 8HP from Adamat Performance you mate a Toyota 1JZ or 2JZ to an eight-speed ZF 8HP automatic from a modern BMW. The kit consists of a CNC-machined adapter plate made of AW7075-T651 aluminium and a one-piece flywheel made of AlZnMg+Ti, including all bolts for the flywheel, adapter and gearbox.
The flywheel replaces the original flywheel of a Toyota automatic, so you no longer need to source that part. When ordering you choose between the light 3.8 kg flywheel for up to 1200 Nm and the solid 4.3 kg flywheel for drag cars with up to 2000 Nm.
The kit fits the 1JZ and 2JZ in all common versions (GE, GTE and FSE, with and without VVT-i) and a whole range of 8HP gearboxes from BMWs with B, N and S engines, from the 8HP45 to the 8HP76.
Key benefits
- Toyota JZ behind a modern 8-speed automatic: the ZF 8HP from BMWs with B46, B47, B48, B57, B58, N47, N57 and S58
- 17.5 mm AW7075-T651 adapter plate, an aluminium alloy that according to Adamat is stronger than S355 and C45 steel
- One-piece AlZnMg+Ti flywheel, with the strength of 42CrMo4 steel and a fitted starter ring gear
- Two flywheel versions: light (3.8 kg, up to 1200 Nm) or solid for drag (4.3 kg, up to 2000 Nm)
- No original flexplate needed: Adamat advises against the original flexplate at higher torque, around 600 Nm and above
- For flat torque converters with 4 or 6 bolts, bolt circle approx. 260.8 mm
- All bolts included for flywheel, adapter and gearbox
- Anodising available as an extra finish for the aluminium parts
Suitable for
Engine: Toyota 1JZ-GE, 1JZ-GTE, 1JZ-FSE, 2JZ-GE, 2JZ-GTE and 2JZ-FSE (with and without VVT-i)
Gearbox: BMW ZF 8HP eight-speed automatic
| ZF 8HP gearbox | Code | Original BMW engine |
|---|---|---|
| 8HP45 | GA8HP45Z | B47 (B47C20, B47D20) |
| 8HP45 | GA8HP45X | N47 |
| 8HP50 | GA8HP50Z | B58 (B58B30) |
| 8HP51 | GA8HP51Z | B48 (B48B20), B46 (B46B20) |
| 8HP70 | GA8HP70 | N57, N57N |
| 8HP75 | GA8HP75X | N57, N57N |
| 8HP75 | GA8HP75Z | B57 (B57B30) |
| 8HP76 | GA8HP76Z | S58 (S58B30) |
The kit is for flat torque converters with 4 or 6 bolts and a bolt circle of approximately 260.8 mm. If your gearbox is not listed or you are unsure about your torque converter, put it in the note field or contact us before ordering.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Part number: ADM-JZ-BZF8HP50-75
- Engine: Toyota 1JZ and 2JZ (GE, GTE, FSE, with and without VVT-i)
- Gearbox: BMW ZF 8HP45, 8HP50, 8HP51, 8HP70, 8HP75 and 8HP76
- Adapter plate: AW7075-T651 aluminium, 17.5 mm thick
- Flywheel: one-piece, AlZnMg+Ti with fitted starter ring gear
- Flywheel versions: light 3.8 kg up to 1200 Nm, solid 4.3 kg for drag up to 2000 Nm
- Torque converter: flat, 4 or 6 bolts, bolt circle approx. 260.8 mm
- Included: adapter plate, flywheel, bolts for flywheel, adapter and gearbox, fitting instructions (PDF)
Fitting and delivery
The flywheel goes on the crankshaft of the JZ, then the adapter plate goes on the block and the 8HP with its torque converter goes behind it. All bolts for this are in the kit, and Adamat supplies fitting instructions as a PDF.
When ordering you choose your flywheel and whether you want the aluminium parts anodised. If you have a specific request, such as something about your chassis, your engine code or your torque converter, put it in the note field. Adamat makes the kit to order. The lead time is 5 to 7 weeks; if you choose anodising, allow about 2 weeks extra.
A 1JZ or 2JZ with eight gears: adapter and flywheel from a single source, made to make the original flexplate unnecessary.
Why choose this JZ swap kit BMW 8HP?
A JZ engine with a modern ZF automatic gives you eight closely spaced gears behind an engine that can handle a lot of power. The weak point in such a combination is often the original flexplate. Adamat solves this with its own flywheel made of an aerospace alloy, in a version for street, drift and track and a solid version for drag. Because adapter and flywheel come from the same manufacturer, everything fits together.
Frequently asked questions
Which flywheel should I choose?
When ordering you choose between two versions. The light 3.8 kg flywheel goes up to 1200 Nm and is intended for street, drift and track. The solid 4.3 kg flywheel is for drag cars with up to 2000 Nm.
Which 8HP gearboxes does the JZ swap kit BMW 8HP fit?
The JZ swap kit BMW 8HP fits the 8HP45, 8HP50, 8HP51, 8HP70, 8HP75 and 8HP76 from the table above, with a flat torque converter with 4 or 6 bolts and a bolt circle of approximately 260.8 mm.
Can I use the original flexplate?
That is not necessary, the flywheel from the kit replaces it. Adamat advises against the original flexplate in cars with more torque, around 600 Nm and above.
What else can I choose when ordering?
You can have the aluminium parts anodised as an extra finish. There is also a note field for, for example, your chassis, engine code or torque converter.
What is the lead time?
Adamat makes the kit to order. Allow 5 to 7 weeks, about 2 weeks longer with anodising.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.










Reviews
There are no reviews yet.