Description
Adamat Toyota 1JZ/2JZ swap kit for Dodge Challenger/Charger/Hellcat ZF 8HP70/8HP90
With this JZ swap kit Dodge 8HP from Adamat Performance you connect a Toyota 1JZ or 2JZ to the ZF 8HP70 or 8HP90 eight-speed automatic from the Dodge Challenger, Charger and Hellcat. Adamat also mentions the 8HP from the Dodge RAM 1500 5.7 HEMI.
The kit consists of an AW7075-T651 Fortal adapter plate, a light two-piece AlZnMg+Ti flywheel and the bolts for flywheel, adapter and gearbox. You no longer use the original Toyota flywheel.
The set fits a wide range of JZ engines, from the 1JZ-GE to the 2JZ-GTE, both with and without VVT-i. This lets you put the Toyota six-cylinder behind the 8HP automatic from the Dodge.
Key benefits
- For the Dodge version of the ZF 8HP: 8HP70 and 8HP90 from the Challenger, Charger and Hellcat
- All JZ variants: 1JZ and 2JZ, GE, GTE and FSE, with or without VVT-i
- Two-piece AlZnMg+Ti flywheel, a light alloy
- Original Toyota flywheel not needed
- AW7075-T651 Fortal adapter plate, according to Adamat stronger than S355 and C45 steel
- Bolts for flywheel, adapter and gearbox are included in the set
- Installation manual as a PDF from Adamat
Suitable for
| Engine (Toyota) | Versions |
|---|---|
| 1JZ | 1JZ-GE, 1JZ-GTE, 1JZ-FSE, with and without VVT-i |
| 2JZ | 2JZ-GE, 2JZ-GTE, 2JZ-FSE, with and without VVT-i |
| Gearbox | From |
|---|---|
| ZF 8HP70 | Dodge Challenger, Charger, Hellcat |
| ZF 8HP90 | Dodge Challenger, Charger, Hellcat |
| ZF 8HP (according to Adamat) | Dodge RAM 1500 5.7 HEMI |
If you have an 8HP from a BMW, take a look at the JZ kits for BMW ZF 8HP. If you are unsure about your gearbox, enter the code in the note field.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Part number: ADM-JZ-8HP-DODGE
- Engine: Toyota 1JZ and 2JZ (GE, GTE, FSE, with or without VVT-i)
- Gearbox: ZF 8HP70 and 8HP90 (Dodge)
- Adapter plate: AW7075-T651 Fortal aluminium
- Flywheel: two-piece, AlZnMg+Ti
- Included: adapter plate, flywheel, bolts for flywheel, adapter and gearbox
- Manual: installation manual as PDF
Installation and delivery
The Adamat flywheel goes on the JZ crankshaft, in place of the original Toyota flywheel. You then mount the adapter plate on the block and the 8HP on the adapter, using the bolts from the set.
When ordering you choose whether the aluminium parts are anodised. In the note field you enter, for example, your engine version, the code of your gearbox or something about your chassis. Adamat makes the kit to order. The lead time is 5 to 7 weeks, with anodising about 2 weeks more.
A Toyota JZ behind the ZF 8HP from the Dodge Challenger, Charger or Hellcat, with an adapter and flywheel from Adamat.
Why choose this JZ swap kit Dodge 8HP?
A JZ and a Dodge 8HP do not simply fit together. Adamat makes the adapter and flywheel for exactly this combination as one set, so everything lines up and you do not need to have anything made yourself. Because the flywheel and adapter are made by Adamat in Poland, we can check questions about your project directly with the manufacturer.
Frequently asked questions
Which JZ engines fit this kit?
According to Adamat, the 1JZ-GE, 1JZ-GTE and 1JZ-FSE and the 2JZ-GE, 2JZ-GTE and 2JZ-FSE, both the versions with and without VVT-i.
Does the JZ swap kit Dodge 8HP also fit an 8HP from a BMW?
The JZ swap kit Dodge 8HP is made for the Dodge version of the 8HP70 and 8HP90. For a BMW ZF 8HP, Adamat has separate JZ kits.
What do I choose when ordering?
You choose whether the aluminium parts are anodised (done externally, about 2 weeks extra). In the note field you pass on, for example, your engine version, gearbox code, chassis or a different engine tilt.
What is the lead time?
Adamat makes the kit to order: allow 5 to 7 weeks. With anodising, add about 2 weeks.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.










Reviews
There are no reviews yet.