Description
Adamat BMW N52/N53/N54/N55/S55 base swap kit for Dodge ZF 8HP70/8HP90
With this N55 base kit Dodge 8HP from Adamat Performance you put a BMW N52, N53, N54, N55 or S55 six-cylinder behind the ZF 8HP70 or 8HP90 automatic from the Dodge Challenger, Charger and Hellcat. This is the base version: you keep the original BMW flexplate and Adamat supplies the parts to connect the Dodge 8HP to it.
At its core is a torque converter adapter made of AlZnMg+Ti that is bolted to the standard BMW flexplate. It comes with an adapter plate made of AW7075-T651 Fortal, a reducing ring for the torque converter hub and the mounting bolts.
Please note: according to Adamat, the original BMW flexplate can only handle limited torque and should not exceed 600 Nm. If your engine builds more torque, Adamat offers a complete version with a solid flywheel up to 2000 Nm.
Key benefits
- Works with the original BMW flexplate, the correct BMW part number for each engine is listed in the table
- Five BMW engines: N52B30, N53B30, N54B30A, N55B30A and S55B30A
- Torque converter adapter made of AlZnMg+Ti, a light alloy with the strength of 42CrMo4 steel
- Adapter plate made of AW7075-T651 Fortal, according to Adamat stronger than S355 and C45 steel (1.0503)
- Reducing ring for the converter hub, matched to the production year of the 8HP
- Mounting bolts for flywheel, adapter and gearbox included in the kit
- Fitting instructions available as a PDF from Adamat
Suitable for
Gearbox: ZF 8HP70 and 8HP90 from the Dodge Challenger, Charger and Hellcat
The torque converter adapter fits these original BMW flexplates:
| BMW engine | Flexplate bolts | BMW flexplate (OEM number) |
|---|---|---|
| N52B30, N53B30 | 6 | 11227548102 |
| N54B30A | 8 | 11227553157 |
| N55B30A, S55B30A | 6 | 11228604045 |
If you are unsure which flexplate or which 8HP you have, put your engine code and the gearbox code in the note field.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Article number: ADM-N5X-8HP-DODGE-FP
- Engine: BMW N52B30, N53B30, N54B30A, N55B30A, S55B30A
- Gearbox: ZF 8HP70 and 8HP90 (Dodge)
- Torque converter adapter: AlZnMg+Ti, bolted to the original BMW flexplate
- Maximum torque with original BMW flexplate: 600 Nm according to Adamat
- Adapter plate: AW7075-T651 Fortal aluminium
- Reducing ring: for the torque converter hub, depending on the production year of the gearbox
- Included: torque converter adapter, reducing ring, adapter plate, bolts for flywheel, adapter and gearbox
- Not included: the BMW flexplate
- Instructions: fitting instructions as a PDF
Fitting and delivery
You bolt the torque converter adapter to the original BMW flexplate of your engine. The adapter plate goes between the block and the 8HP, and the reducing ring adapts the torque converter hub to the production year of the gearbox.
When ordering, you choose whether the aluminium parts are anodised. In the note field, enter your engine code, the year of manufacture of the 8HP and, if applicable, something about your chassis or a different engine tilt. Adamat makes the kit to order. The lead time is 5 to 7 weeks, approximately 2 weeks longer with anodising.
The base route from BMW N5x to Dodge 8HP: your own flexplate stays, Adamat supplies the adapter plate, converter adapter and reducing ring.
Why choose this N55 base kit Dodge 8HP?
If your BMW six-cylinder stays below 600 Nm, you do not need to buy a separate flywheel: you use the original flexplate and complete it with the parts from Adamat. If your project grows later, Adamat has a complete kit with a solid flywheel up to 2000 Nm. Adapter and converter adapter come from one manufacturer in Poland, so we can check questions about your combination directly with Adamat.
Frequently asked questions
Is a flexplate included in the N55 base kit Dodge 8HP?
No, the N55 base kit Dodge 8HP uses the original BMW flexplate of your engine. The BMW part number you need is listed per engine in the table above.
How much torque can this base kit handle?
The limit is the original BMW flexplate: according to Adamat no more than 600 Nm. For more torque there is the complete version with a solid flywheel up to 2000 Nm.
What do I choose when ordering?
You choose whether the aluminium parts are anodised (externally, approximately 2 extra weeks). In the note field, enter your engine code and the year of manufacture of your 8HP so that the correct reducing ring is included, and if applicable your chassis or a different engine tilt.
What is the lead time?
Adamat makes the kit to order: allow 5 to 7 weeks. Anodising adds approximately 2 weeks.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.










Reviews
There are no reviews yet.