Adamat BMW N52/N53/N54/N55/S55 adapter kit for BMW ZF 8HP45/50/51/70/75

€494,60 Incl. VAT

Adamat BMW N52/N53/N54/N55/S55 adapter kit for BMW ZF 8HP45/50/51/70/75

Kit to fit a BMW ZF 8HP eight-speed automatic behind an N52, N53, N54, N55 or S55, with an AW7075-T651 adapter plate, an AlZnMg+Ti converter hub and all bolts. You use the original BMW flexplate of your engine (not included); Adamat recommends a maximum of 600 Nm. When ordering, you choose whether the aluminium parts are anodised. Lead time 5 to 7 weeks, approx. 2 weeks longer with anodising.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Optional anodised coating on the aluminium parts. This is done externally and adds about 2 weeks to the lead time.

For example your engine code (N52, N53, N54, N55 or S55), the code of your 8HP, your chassis, a different engine tilt or anything else Adamat should take into account.

SKU: ADM-240 Category: Brand:

Description

Adamat BMW N52/N53/N54/N55/S55 adapter kit for BMW ZF 8HP45/50/51/70/75

With this N55 8HP adapter kit from Adamat Performance, you fit a ZF 8HP eight-speed automatic from a newer BMW behind an N52, N53, N54, N55 or S55. The kit consists of an adapter plate for the gearbox, a converter hub and the bolts for flywheel, adapter and gearbox.

With this kit you use the original flexplate from a BMW automatic. The Adamat converter hub is made of AlZnMg+Ti and fits the flexplate of your engine; the part numbers are in the table below. The flexplate itself is not included in the kit.

Because an original flexplate can only handle limited torque, Adamat recommends not going above 600 Nm in your project. When ordering, you choose whether the aluminium parts are anodised, and in the note field you enter your engine code.

Key advantages

  • Newer ZF 8HP behind your N5x engine, from the GA8HP45X to the GA8HP75Z
  • Works with the original BMW flexplate of the N52/N53, N54 or N55/S55
  • Converter hub made of AlZnMg+Ti, a light alloy with the strength of 42CrMo4 steel
  • Adapter plate made of AW7075-T651, according to Adamat stronger than S355 and C45 steel
  • All power versions of the listed engines, including the N52B25 and N53B25
  • Bolts for flywheel, adapter and gearbox included
  • Installation manual as a PDF from Adamat

Suitable for

Engines and matching original flexplate (not included):

BMW engineFlexplateBMW part number
N52B25A, N52B30A, N53B25, N53B306 bolts11227548102
N54B30A8 bolts11227553157
N55B30A, S556 bolts11228604045

Gearboxes (BMW ZF 8HP), according to Adamat’s list:

ZF typeBMW codeOriginal BMW engine
8HP70GA8HP70N57, N57N
8HP75GA8HP75XN57, N57N
8HP50ZGA8HP50ZB58 (B58B30)
8HP75ZGA8HP75ZB57 (B57B30)
8HP51ZGA8HP51ZB48 (B48B20), B46 (B46B20)
8HP45ZGA8HP45XB47 (B47C20, B47D20)

If your gearbox code is not listed, enter it in the note field. We will check with Adamat whether the kit fits.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Item number: ADM-N5X-8HP45-75-FP
  • Engine: BMW N52, N53, N54, N55 and S55 (all power versions)
  • Gearbox: BMW ZF 8HP (see table)
  • Adapter plate: AW7075-T651 aluminium
  • Converter hub: AlZnMg+Ti, for the original BMW flexplate
  • Recommended maximum torque: 600 Nm
  • Included: adapter plate, converter hub, bolts for flywheel, adapter and gearbox
  • Not included: original BMW flexplate

Installation and delivery

The converter hub goes on the original BMW flexplate of your engine, which you supply yourself or order separately using the number from the table. You then bolt the adapter plate and the 8HP in place with the supplied bolts. Adamat provides an installation manual as a PDF.

When ordering, choose whether you want the aluminium parts anodised. In the note field you enter your engine code, the code of your 8HP or something about your chassis. Adamat makes the kit to order. The lead time is 5 to 7 weeks, about 2 weeks longer with anodising.

A modern ZF 8HP behind your N52, N54 or N55, with the original BMW flexplate and an adapter and hub from Adamat.

Why choose this N55 8HP adapter kit?

If your engine stays below 600 Nm, the original flexplate is a logical basis and all you need from Adamat is the adapter, the hub and the bolts. Adamat makes these parts in Poland from AW7075-T651 and AlZnMg+Ti, and specifies exactly which BMW flexplate goes with each engine. That way you know in advance what you need to order.

Frequently asked questions

Is the flexplate included with the N55 8HP adapter kit?

No, the N55 8HP adapter kit works with the original flexplate from a BMW automatic. For the N52/N53 that is 11227548102, for the N54 11227553157 and for the N55/S55 11228604045.

How much torque can this kit handle?

Because the original flexplate can only handle limited torque, Adamat recommends not going above 600 Nm.

What do I choose when ordering?

You choose whether the aluminium parts are anodised (externally, about 2 weeks extra). In the note field you enter your engine code, and if needed your gearbox code, chassis or a different engine tilt.

What is the lead time?

Adamat makes the kit to order: allow 5 to 7 weeks. Anodising adds about 2 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight6 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat BMW N52/N53/N54/N55/S55 adapter kit for BMW ZF 8HP45/50/51/70/75”
EN

Your Shopping cart

Close