Adamat Mazda MX-5/Ford Duratec 2.0/2.3/2.5 swap kit for BMW ZF 8HP50/8HP70

€679,01 Incl. VAT

Adamat Mazda MX-5/Ford Duratec 2.0/2.3/2.5 swap kit for BMW ZF 8HP50/8HP70

Swap kit to connect a Duratec 2.0, 2.3 or 2.5 to a BMW ZF 8HP automatic: adapter plate made of AW7075-T651 aluminium, a two-piece AlZnMg+Ti flywheel (5.1 kg, up to 2000 Nm) with steel starter ring gear and centring pin for the converter, plus all bolts. Fits the 8HP50Z, 8HP51Z, 8HP70, 8HP75 and 8HP75Z. When ordering, you choose whether the aluminium parts are anodised. Lead time 5 to 7 weeks.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Optional anodised coating on the aluminium parts. This is done externally and adds about 2 weeks to the lead time.

For example your chassis, engine code, a different engine tilt or anything else Adamat should take into account.

SKU: ADM-239 Category: Brand:

Description

Adamat Mazda MX-5/Ford Duratec 2.0/2.3/2.5 swap kit for BMW ZF 8HP50/8HP70

If you want to combine a 2.0, 2.3 or 2.5 litre Duratec four-cylinder with a modern eight-speed automatic, this Duratec BMW 8HP swap kit from Adamat Performance contains the parts you need. The kit connects the engine to the BMW ZF 8HP and consists of an adapter plate, a two-piece flywheel and all bolts for flywheel, adapter and gearbox.

The flywheel consists of a main flywheel with a steel starter ring gear and a converter hub with a pressed-in steel centring pin. This pin aligns the torque converter of the 8HP with the main flywheel. Together the two parts weigh 5.1 kg, and the assembly is designed for torque up to 2000 Nm.

Adamat supplies the kit for the 8HP gearboxes from, among others, the BMW B48, B58, B57 and N57. When ordering, you choose whether the aluminium parts are anodised, and via the note field you give Adamat extra information about your project.

Key advantages

  • Ready-made combination of adapter plate, two-piece flywheel and bolts for flywheel, adapter and gearbox
  • Two-piece flywheel up to 2000 Nm made of AlZnMg+Ti, a light alloy with the strength of 42CrMo4 steel
  • Total flywheel weight 5.1 kg
  • Steel starter ring gear on the main flywheel for the starter motor
  • Pressed-in steel centring pin in the converter hub, which aligns the torque converter with the main flywheel
  • Adapter plate made of AW7075-T651 aluminium, stronger than S355 and C45 steel
  • For five ZF 8HP gearboxes: 8HP50Z, 8HP51Z, 8HP70, 8HP75 and 8HP75Z
  • Installation manual available as a PDF from Adamat

Suitable for

Engine: Mazda MX-5 / Ford Duratec 2.0, 2.3 and 2.5

Gearbox: BMW ZF 8HP automatic (8 speeds)

ZF 8HP gearboxCodeOriginal BMW engine
8HP70GA8HP70N57, N57N
8HP75GA8HP75XN57, N57N
8HP50ZGA8HP50ZB58 (B58B30)
8HP75Z, 8HP75GA8HP75ZB57 (B57B30)
8HP51Z, 8HP51GA8HP51ZB48 (B48B20), B46 (B46B20)

If your 8HP gearbox is not listed, state the code in the note field when ordering. We will then check with Adamat what is possible.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Item number: ADM-DUR-BZF8HP50-75
  • Engine: Duratec 2.0, 2.3 and 2.5
  • Gearbox: BMW ZF 8HP50Z, 8HP51Z, 8HP70, 8HP75, 8HP75Z
  • Flywheel: two-piece, AlZnMg+Ti with the strength of 42CrMo4 steel
  • Maximum flywheel torque: 2000 Nm
  • Flywheel weight: 5.1 kg (total)
  • Main flywheel: with steel starter ring gear
  • Converter hub: with pressed-in steel centring pin
  • Adapter plate: AW7075-T651 aluminium, stronger than S355 and C45 (1.0503) steel
  • Included: adapter plate, two-piece flywheel, bolts for flywheel, adapter and gearbox
  • Installation manual: as a PDF from Adamat

Fitting and delivery

The main flywheel goes on the crankshaft of the Duratec, the converter hub takes the torque converter of the 8HP, and the adapter plate connects the engine block to the bell housing. The bolts for all three connections are included in the kit, and Adamat has an installation manual as a PDF.

When ordering, you indicate whether you want the aluminium parts anodised. If you have a special setup, a different engine tilt or want to pass on your chassis, use the note field. Adamat makes the kit to order, the lead time is 5 to 7 weeks. If you choose anodising, it takes approximately 2 weeks longer.

A light Duratec four-cylinder with BMW’s eight-speed ZF automatic, connected by a two-piece flywheel that centres the converter itself.

Why choose this Duratec BMW 8HP swap kit?

The ZF 8HP can be found in many BMWs, from the B48 and B46 to the B57, B58 and N57, which makes it a readily available gearbox for a swap project. Adamat built the flywheel in two parts, so that the torque converter aligns neatly with the main flywheel using the steel centring pin. Adamat Performance has more than 15 years of experience in motorsport and makes the adapter and flywheel itself, so you do not have to match parts from different manufacturers.

Frequently asked questions

Which Duratec engines fit this kit?

The kit is made for the Duratec 2.0, 2.3 and 2.5, as Adamat offers them for the Mazda MX-5 swap.

Which BMW 8HP gearboxes does the Duratec BMW 8HP swap kit fit?

The Duratec BMW 8HP swap kit fits the 8HP70 and 8HP75 from the N57, the 8HP50Z from the B58, the 8HP75Z from the B57 and the 8HP51Z from the B48 and B46. See the table above.

How heavy is the flywheel and how much torque can it handle?

The two-piece flywheel weighs 5.1 kg in total and is designed for a maximum of 2000 Nm.

What do I choose when ordering?

You choose whether the aluminium parts are anodised. This is done externally and takes approximately 2 weeks extra. In the note field you can also pass on your chassis, your gearbox code or a different engine tilt.

What is the lead time?

Adamat makes the kit to order. Allow 5 to 7 weeks, with anodising approximately 2 weeks longer.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight12 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat Mazda MX-5/Ford Duratec 2.0/2.3/2.5 swap kit for BMW ZF 8HP50/8HP70”
EN

Your Shopping cart

Close