Adamat BMW M10/M30/M88/S38 swap kit adapter + flywheel for BMW ZF 8HP45/50/70

€613,77 Incl. VAT

Adamat BMW M10/M30/M88/S38 swap kit adapter + flywheel for BMW ZF 8HP45/50/70

Complete kit to connect a BMW M30, M88 or S38 to an eight-speed ZF 8HP automatic, with a 19.5 mm AW7075-T651 adapter plate, a 3.5 kg AlZnMg+Ti flywheel with integrated starter ring gear and all mounting bolts. When ordering, you choose the engine tilt (30 degrees, vertical or a special angle) and optionally anodising. Lead time 5 to 7 weeks.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Choose how the engine will sit in the car. From the factory, the engine sits at 30 degrees.

Optional anodised coating on the aluminium parts. This is done externally and adds about 2 weeks to the lead time.

For example your chassis, engine code, the desired special angle, the type code of your 8HP gearbox or anything else Adamat should take into account.

SKU: ADM-256 Category: Brand:

Description

Adamat BMW M10/M30/M88/S38 swap kit adapter + flywheel for BMW ZF 8HP45/50/70

With this M30 S38 8HP swap kit from Adamat Performance, you put an older BMW engine such as the M30, M88 or S38 in front of a modern ZF 8HP automatic. The kit consists of an adapter plate, a lightweight flywheel and all mounting bolts.

The AlZnMg+Ti flywheel weighs 3.5 kg and is connected directly to the torque converter of the 8HP. The starter ring gear is integrated in the flywheel and, according to Adamat, fits the original BMW starter motor of your engine. The 19.5 mm adapter plate is made of AW7075-T651 aluminium.

When ordering, you choose the tilt at which the engine sits in the car: the original 30 degrees, vertical or a special angle. You also choose whether the aluminium parts are anodised, and in the note field you can pass on extra information.

Key advantages

  • M30, M88 or S38 with an 8HP: six engine codes according to Adamat’s list, to an eight-speed ZF automatic
  • Engine tilt of your choice: 30 degrees as from the factory, vertical or your own angle
  • 3.5 kg flywheel made of AlZnMg+Ti, for direct connection to the torque converter
  • Designed for a maximum of 2000 Nm; Adamat mentions heavy loads such as quarter mile drag racing
  • Starter ring gear in the flywheel, matching the original BMW starter motor
  • 19.5 mm AW7075-T651 adapter plate, according to Adamat stronger than S355 and C45 steel (1.0503)
  • Mounting bolts for flywheel, adapter and gearbox included

Suitable for

Engine: BMW M30B30M, M30B35M, M88, S38B35, S38B36 and S38B38

Adamat’s product name also includes the M10, but it is not in the engine list for this kit. If you are fitting an M10, state this in the note field and we will check with Adamat.

Gearbox: BMW ZF 8HP eight-speed automatic

BMW ZF 8HP gearboxType codeOriginal BMW engine
ZF 8HP70GA8HP70N57, N57N
ZF 8HP75GA8HP75XN57, N57N
ZF 8HP50ZGA8HP50ZB58 (B58B30)
ZF 8HP75ZGA8HP75ZB57 (B57B30)
ZF 8HP51ZGA8HP51ZB48 (B48B20)
ZF 8HP51ZGA8HP51ZB46 (B46B20)
ZF 8HP45ZGA8HP45XB47 (B47C20, B47D20)
ZF 8HP45ZGA8HP45XN47, torque converter with 4 bolts

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Item number: ADM-MS388-8HP4575-SF
  • Engine: BMW M30B30M, M30B35M, M88, S38B35, S38B36, S38B38 (M10 only mentioned in the product name)
  • Gearbox: BMW ZF 8HP45, 8HP50, 8HP51, 8HP70 and 8HP75 (see table)
  • Flywheel: AlZnMg+Ti, 3.5 kg, with integrated starter ring gear, for direct connection to the torque converter
  • Maximum engine torque: 2000 Nm
  • Adapter plate: AW7075-T651 aluminium, 19.5 mm thick
  • Engine tilt: 30 degrees (original), vertical or special angle
  • Included: adapter plate, flywheel and mounting bolts for flywheel, adapter and gearbox
  • Installation manual: available from Adamat

Fitting and delivery

The flywheel goes on the crankshaft and the torque converter of the 8HP is bolted directly to it. The adapter plate connects the block to the gearbox housing, at the engine tilt you choose when ordering. If you choose a special angle, enter it in the note field. Adamat has an installation manual for this kit.

Adamat makes the kit to order. The lead time is 5 to 7 weeks. With anodising it takes approximately 2 weeks longer.

An M30, M88 or S38 with an eight-speed ZF 8HP behind it, with a 3.5 kg flywheel and an adapter plate at the engine tilt that suits your project.

Why choose this M30 S38 8HP swap kit?

Adamat Performance has been working for motorsport for more than 15 years and makes adapters to connect many different engines to the ZF 8HP. With this kit you match the engine tilt to your project and use the original starter motor. The flywheel, adapter plate and bolts come from one manufacturer and therefore fit together.

Frequently asked questions

Which engines fit this M30 S38 8HP swap kit?

According to Adamat, this M30 S38 8HP swap kit fits the BMW M30B30M, M30B35M, M88, S38B35, S38B36 and S38B38. The M10 is only in the product name; mention it in the note field if you use one.

Which engine tilt should I choose?

The original tilt is 30 degrees. If the engine will stand upright, choose vertical. If you need a different angle, choose special angle and state the desired angle in the note field.

Which other choices do I make when ordering?

You choose whether the aluminium parts are anodised (approximately 2 weeks extra lead time). In the note field you can enter your chassis, engine code, the type code of your 8HP gearbox or other requirements.

What is the lead time?

Adamat makes the kit to order, allow 5 to 7 weeks. With anodising, add approximately 2 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight12 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat BMW M10/M30/M88/S38 swap kit adapter + flywheel for BMW ZF 8HP45/50/70”
EN

Your Shopping cart

Close