Description
Adamat Mercedes M112/M113/M113K AMG basic swap kit for Jaguar XF X250 ZF 8HP70
With the M113 swap kit Jaguar 8HP from Adamat Performance you put a Mercedes-Benz V engine from the M112 or M113 family, including the M113K and the AMG versions, behind the ZF 8HP70 automatic from the Jaguar XF X250 2.2. It is a basic kit: you use the original flexplate from the Mercedes automatic, which you buy separately.
The set contains an adapter plate and a converter adapter. The adapter plate is 19.5 mm thick and machined from AW7075-T651 aluminium. The AlZnMg+Ti converter adapter weighs 1.7 kg and has a permanently fitted pin that centres the torque converter of the 8HP, so the whole converter sits straight in the crankshaft of the engine.
All bolts for fitting are included, and Adamat has fitting instructions as a PDF.
Key benefits
- Mercedes V engine on the Jaguar 8HP70: M112, M113, M113K and AMG versions
- Works with the original Mercedes flexplate, so no special flexplate needed
- 1.7 kg converter adapter made of AlZnMg+Ti, with the strength of 42CrMo4 steel
- Fixed centring pin that centres the 8HP torque converter in the crankshaft
- 19.5 mm AW7075-T651 adapter plate, according to Adamat stronger than S355 and C45 steel (1.0503)
- All mounting bolts included
- Fitting instructions as a PDF from Adamat
- Optionally anodised for an extra finishing layer
Suitable for
Gearbox: Jaguar ZF 8HP70 from the XF X250 2.2
Adamat specifies the kit for these engines:
| Engine | Versions and models according to Adamat |
|---|---|
| Mercedes-Benz M112 | E24, E26, E32, E32ML, E37 |
| Mercedes-Benz M113 | C43, CLK430, ML430, S430, G500, S500, SL500, ML500, CLK500, E500, CLS500, R500 |
| Mercedes-Benz M113K and AMG | C55, SL55, E55, S55, ML55, CLK55, CL55, G55, SLK55, CLS55 |
Not included, but required: the original flexplate from a Mercedes automatic.
| Engine | Mercedes flexplate (OEM) |
|---|---|
| M112 and M113 (standard) | A1120320247 |
| M113K and AMG | A1120300812 |
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Part number: ADM-M113FP-8HPJAGX25
- Engine: Mercedes-Benz M112, M113, M113K and AMG versions
- Gearbox: Jaguar ZF 8HP70 (XF X250 2.2)
- Adapter plate: AW7075-T651 aluminium, 19.5 mm thick
- Converter adapter: AlZnMg+Ti, 1.7 kg, with permanently fitted centring pin for the torque converter
- Included: adapter plate, converter adapter and all mounting bolts
- Not included: Mercedes flexplate A1120320247 (M112/M113) or A1120300812 (M113K/AMG)
- Instructions: fitting instructions as a PDF
Fitting and delivery
The converter adapter goes on the crankshaft together with the original Mercedes flexplate, and the adapter plate goes between the block and the bell housing of the 8HP70. The centring pin in the converter adapter makes sure the torque converter sits exactly in the centre of the crankshaft.
When ordering you choose whether the aluminium parts are anodised. In the note field you enter, for example, your engine code, your chassis or a different engine tilt. Adamat makes the kit to order. Allow a lead time of 5 to 7 weeks, about 2 weeks extra with anodising.
A Mercedes V engine with the ZF 8HP70 from the Jaguar XF: Adamat supplies the adapter and the converter adapter, and the original flexplate stays in use.
Why choose this M113 swap kit Jaguar 8HP?
Because the kit works with the original Mercedes flexplate, you build on a familiar Mercedes part. Adamat makes the adapter plate and the converter adapter itself, from the same light and strong materials it uses in its motorsport kits, and the fixed centring pin takes care of aligning the torque converter.
Frequently asked questions
Is there a flexplate in the M113 swap kit Jaguar 8HP?
No, the M113 swap kit Jaguar 8HP is a basic kit for the original flexplate from a Mercedes automatic. For the M112 and M113 that is A1120320247, for the M113K and AMG versions A1120300812.
Which engines fit?
The M112 (E24 to E37), the M113 from the C43, S430, E500 and SL500, among others, and the M113K and AMG versions from the C55, E55, S55 and SL55, among others. The full list is in the table above.
Which gearbox goes with it?
The ZF 8HP70 from the Jaguar XF X250 2.2, as specified by Adamat. If you are unsure about your gearbox, put the code in the note field.
What do I choose when ordering?
Whether the aluminium parts are anodised. There is also a note field for your engine code, chassis or other requests.
What is the lead time?
Adamat makes the kit to order. The lead time is 5 to 7 weeks, about 2 weeks longer with anodising.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.










Reviews
There are no reviews yet.