Adamat Honda S2000 F20/F22 swap kit for Dodge ZF 8HP70/8HP90

€686,46 Incl. VAT

Adamat Honda S2000 F20/F22 swap kit for Dodge ZF 8HP70/8HP90

Complete swap kit from Adamat Performance to connect a Honda S2000 F20 or F22 to a ZF 8HP70 or 8HP90 from the Dodge Challenger, Charger or Hellcat. With a billet AlZnMg+Ti flywheel (3.9 kg) with Honda ring gear, centring cap and reducing ring for the converter, a 19 mm AW7075-T651 adapter plate and all bolts. Anodising is optional; you provide the year of manufacture of your 8HP in the note field. Lead time 5 to 7 weeks.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Optional anodised coating on the aluminium parts. This is done externally and adds about 2 weeks to the lead time.

For example the year of manufacture or the code of your 8HP (for the correct reducing ring), your chassis or anything else Adamat should take into account.

SKU: ADM-291 Category: Brand:

Description

Adamat Honda S2000 F20/F22 swap kit for Dodge ZF 8HP70/8HP90

With this S2000 swap kit Dodge 8HP from Adamat Performance, you fit a Honda S2000 engine, the F20 or the F22, to a ZF 8HP70 or 8HP90 automatic from the Dodge Challenger, Charger or Hellcat. The kit consists of a billet flywheel, an adapter plate and all mounting bolts.

The flywheel is made from one piece of AlZnMg+Ti and weighs 3.9 kg. It carries a factory Honda ring gear. A centring cap for the torque converter and a reducing ring are bolted onto the flywheel, matched to the version of the converter in your 8HP.

When ordering, you choose whether the aluminium parts are anodised. In the note field you provide the year of manufacture or the version of your 8HP, so that Adamat supplies the correct reducing ring.

Key benefits

  • Honda F20/F22 to a Dodge 8HP: the S2000 engine connects to the ZF 8HP70 or 8HP90 from the Challenger, Charger and Hellcat
  • Billet flywheel made of AlZnMg+Ti in one piece, weighing 3.9 kg
  • Factory Honda ring gear on the flywheel
  • Centring cap and reducing ring for the torque converter, matching the version of your 8HP
  • 19 mm AW7075-T651 adapter plate, an aluminium alloy that according to Adamat is stronger than S355 and C45 steel
  • Complete fastening: bolts for flywheel, adapter plate and gearbox
  • Installation manual as a PDF from Adamat
  • Optional anodising as an extra finish for the aluminium

Suitable for

Engine: Honda S2000 F20 and F22

Gearbox: ZF 8HP70 and 8HP90 from the Dodge Challenger, Charger and Hellcat

Which reducing ring you need depends on the version of the torque converter in your 8HP. Therefore, state the year of manufacture or the code of your gearbox in the note field.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Item number: ADM-S2000-8HP-DODGE
  • Engine: Honda S2000 F20 and F22
  • Gearbox: ZF 8HP70 and 8HP90 (Dodge Challenger, Charger, Hellcat)
  • Flywheel: one-piece billet AlZnMg+Ti, 3.9 kg, with Honda ring gear
  • Converter connection: centring cap and reducing ring, bolted onto the flywheel, depending on the converter version
  • Adapter plate: AW7075-T651 aluminium (Fortal), 19 mm thick
  • Included: flywheel with ring gear, centring cap, reducing ring, adapter plate and bolts for flywheel, adapter and gearbox
  • Installation manual: PDF from Adamat

Installation and delivery

The adapter plate fits between the block of the F20 or F22 and the gearbox housing of the 8HP. The flywheel mounts on the crankshaft and, with the centring cap and the reducing ring, takes up the torque converter of the 8HP. Adamat has an installation manual as a PDF for this kit.

Adamat makes the kit to order; the lead time is 5 to 7 weeks. With anodising it takes approximately 2 weeks longer, because this finish is done externally. In the note field, provide the year of manufacture or the version of your 8HP and, if applicable, your chassis.

Honda S2000 block in front, Dodge 8HP behind it: flywheel, converter connection, adapter plate and bolts in one kit from Adamat.

Why choose this S2000 swap kit Dodge 8HP?

Adamat Performance has been making parts for motorsport for more than 15 years and supplies every swap kit as a complete set. Flywheel, converter connection and adapter plate are matched to each other, so you do not have to combine separate parts from different suppliers.

Frequently asked questions

Which engine and gearbox is this kit for?

This S2000 swap kit Dodge 8HP is made for the Honda F20 and F22 from the S2000, in combination with a ZF 8HP70 or 8HP90 from the Dodge Challenger, Charger or Hellcat.

Why am I asked for the year of manufacture of my 8HP?

The centring cap and the reducing ring on the flywheel depend on the version of the torque converter. With the year of manufacture or the code of your gearbox in the note field, Adamat can supply the correct ring.

What is included in the kit?

A billet AlZnMg+Ti flywheel with Honda ring gear, centring cap and reducing ring for the converter, a 19 mm AW7075-T651 adapter plate and the bolts for flywheel, adapter and gearbox.

What do I choose when ordering?

You choose whether the aluminium parts are anodised. There is also a note field for the year of manufacture or the version of your 8HP, your chassis or other information for Adamat.

What is the lead time?

Adamat makes the kit to order. Allow 5 to 7 weeks; with anodising, add approximately 2 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight12 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat Honda S2000 F20/F22 swap kit for Dodge ZF 8HP70/8HP90”
EN

Your Shopping cart

Close