Description
Adamat VW/Audi/Porsche VR6, R32, R36 base swap kit for BMW ZF 8HP45/50/70
This VR6 base kit BMW 8HP from Adamat Performance connects a VR6 engine from VW, Audi or Porsche, such as the R32 or the R36, to a ZF 8HP automatic from a BMW. It is the base version of the swap: the original flexplate (part number 022105323F) stays in use and Adamat supplies the parts to connect the 8HP to it.
The heart of the kit is an AlZnMg+Ti torque converter adapter with a steel centring pin, which is mounted on the original flexplate. It comes with a 34 mm thick AW7075-T651 Fortal adapter plate and a complete set of bolts for the converter adapter, adapter plate and gearbox.
The converter adapter itself is designed for 1000 Nm. Adamat does point out that the original flexplate limits the maximum torque of this setup, so take that into account when planning your engine.
Key advantages
- Base kit for the original flexplate: you reuse flexplate 022105323F, which is not included in the kit
- AlZnMg+Ti torque converter adapter, a light alloy with the strength of 42CrMo4 steel, designed for up to 1000 Nm
- Steel centring pin in the converter adapter
- Light: the converter adapter weighs 2.9 kg
- 34 mm AW7075-T651 Fortal adapter plate, according to Adamat stronger than S355 and C45 steel (1.0503)
- Widely usable on BMW 8HP gearboxes: from the 8HP45Z to the 8HP76Z, see the table below
- Three engine tilts: vertical, tilted 15 degrees or custom at 7.5 degrees, to be chosen when ordering
- All mounting bolts for converter adapter, adapter plate and gearbox included in the kit
Suitable for
Engine: VW, Audi and Porsche VR6, R32 and R36
Gearbox: BMW ZF 8HP automatic (8-speed) with flat torque converter, bolt circle approx. 260.8 mm
| ZF 8HP type | Code | Original BMW engine | Torque converter bolts |
|---|---|---|---|
| 8HP70 | GA8HP70 | N57, N57N | 6 |
| 8HP75 | GA8HP75X | N57, N57N | 6 |
| 8HP50 / 8HP50Z | GA8HP50Z | B58 (B58B30) | 6 |
| 8HP76 / 8HP76Z | GA8HP76Z | S58 (S58B30) | 6 |
| 8HP75Z / 8HP75 | GA8HP75Z | B57 (B57B30) | 6 |
| 8HP51Z / 8HP51 | GA8HP51Z | B48 (B48B20) | 6 |
| 8HP51Z / 8HP51 | GA8HP51Z | B46 (B46B20) | 6 |
| 8HP45Z | GA8HP45X | B47C20, B47D20 | 6 |
| 8HP45Z | GA8HP45X | N47 | 4 |
Not included, but required for the swap:
- Original flexplate 022105323F
- Flexplate bolts N91167101 and N90932603
- A starter motor, of your choice: 012911023G, 012911023GX, 012911023H, 012911023HX, BOSCH 0001123002, BOSCH 0001123003, BOSCH 0986021910, DELCO DRT1910, DELCO DT3020, MAGNETI MARELLI 944280801120 or MAGNETI MARELLI MRS80112
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Item number: ADM-VR6-8HP4575-FP
- Engine: VW, Audi and Porsche VR6, R32 and R36
- Gearbox: BMW ZF 8HP with flat torque converter (see table)
- Torque converter adapter: AlZnMg+Ti with steel centring pin, 2.9 kg, designed for up to 1000 Nm
- Maximum torque: limited by the original flexplate (according to Adamat)
- Adapter plate: AW7075-T651 Fortal aluminium, 34 mm thick
- Included: torque converter adapter, adapter plate, bolts for converter adapter, adapter plate and gearbox
- Not included: flexplate 022105323F, flexplate bolts and starter motor
- Manual: installation manual as a PDF
Fitting and delivery
You bolt the torque converter adapter to the original flexplate of the VR6, and the adapter plate goes between the engine block and the 8HP. You buy the flexplate, flexplate bolts and starter motor separately; the part numbers are listed above.
When ordering, you choose the engine tilt: vertical block (0 degrees), tilted block (15 degrees) or custom (7.5 degrees). You also choose whether the aluminium parts are anodised. If you want to let Adamat know something, such as your chassis, the code of your 8HP or a particular feature of your engine, enter it in the note field. Adamat makes the kit to order. The lead time is 5 to 7 weeks, with anodising approximately 2 weeks longer.
A VR6, R32 or R36 paired with a BMW ZF 8HP: the original flexplate stays, Adamat supplies the converter adapter, adapter plate and bolts.
Why choose this VR6 base kit BMW 8HP?
Because you reuse the original flexplate, the kit stays compact and you do not need to buy a separate flywheel. The converter adapter and adapter plate come from one manufacturer and are matched to each other. Adamat Performance has more than 15 years of experience in motorsport and makes the kits in Poland, so we can check questions about your combination of engine and gearbox directly with Adamat.
Frequently asked questions
Is a flexplate included in the VR6 base kit BMW 8HP?
No, the VR6 base kit BMW 8HP works with the original flexplate 022105323F. You also buy the flexplate bolts N91167101 and N90932603 and a starter motor separately.
How much torque can this kit handle?
The torque converter adapter is designed for 1000 Nm. According to Adamat, the original flexplate limits the maximum torque of the setup; Adamat does not give an exact value for this.
Does the kit fit my 8HP?
The kit is intended for BMW ZF 8HP gearboxes with a flat torque converter and a bolt circle of approximately 260.8 mm, such as the 8HP45Z, 8HP50Z, 8HP51Z, 8HP70, 8HP75(Z) and 8HP76Z from the table. If in doubt, enter the code of your gearbox in the note field.
What do I choose when ordering?
You choose the engine tilt (vertical, 15 degrees or custom 7.5 degrees) and whether the aluminium parts are anodised. In the note field you can add extra information for Adamat, such as your chassis or the gearbox code.
What is the lead time?
Adamat makes the kit to order: allow 5 to 7 weeks. If you choose anodising, add approximately 2 weeks.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.







Reviews
There are no reviews yet.