Adamat Nissan SR20DET complete swap kit adapter + flywheel for BMW ZF 8HP45/50/70/75

€641,43 Incl. VAT

Adamat Nissan SR20DET complete swap kit adapter + flywheel for BMW ZF 8HP45/50/70/75

Complete swap kit to connect a Nissan SR20DET to a BMW ZF 8HP: 24.5 mm AW7075-T651 adapter plate, AlZnMg+Ti flywheel (approx. 3.95 kg) with ring gear for the original CA18 starter motor and all bolts. The kit is designed for engine torque of up to 2000 Nm. When ordering, you choose whether the aluminium parts are anodised. Lead time 5 to 7 weeks, with anodising approx. 2 weeks longer.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Optional anodised coating on the aluminium parts. This is done externally and adds about 2 weeks to the lead time.

For example the gearbox code of your 8HP, your chassis, a different engine tilt or anything else Adamat should take into account.

SKU: ADM-301 Category: Brand:

Description

Adamat Nissan SR20DET complete swap kit adapter + flywheel for BMW ZF 8HP45/50/70/75

The SR20DET swap kit BMW 8HP from Adamat Performance is a complete kit to connect a Nissan SR20DET to a BMW ZF 8HP automatic. You get an adapter plate, a specially made flywheel and all bolts for the flywheel, adapter and gearbox.

The flywheel connects the engine directly to the torque converter of the 8HP. Adamat makes it from AlZnMg+Ti, a light alloy with the strength of 42CrMo4 steel, and designed it for heavy projects and extreme loads, such as 1/4 mile racing. The kit is designed for engine torque of up to 2000 Nm.

The flywheel of approximately 3.95 kg has a ring gear that fits the original Nissan CA18 starter motor. The adapter plate is 24.5 mm thick and made of AW7075-T651 aluminium.

Key advantages

  • Complete kit: adapter plate, flywheel and bolts for flywheel, adapter and gearbox
  • Direct connection to the 8HP converter via the Adamat flywheel
  • Designed for up to 2000 Nm of engine torque, also for heavy loads such as the 1/4 mile
  • Light flywheel of approx. 3.95 kg made of AlZnMg+Ti, with the strength of 42CrMo4 steel
  • Built-in ring gear for the original Nissan CA18 starter motor
  • 24.5 mm AW7075-T651 adapter plate, according to Adamat stronger than S355 and C45 steel (1.0503)
  • For 8HP gearboxes with a large flat converter, both the 4-bolt and the 6-bolt version
  • Installation manual from Adamat

Suitable for

Engine: Nissan SR20DET

Gearbox: BMW ZF 8HP with large flat torque converter (4-bolt and 6-bolt version)

ZF 8HPGearbox codeFrom BMW with engine
8HP70GA8HP70N57, N57N
8HP75GA8HP75XN57, N57N
8HP50ZGA8HP50ZB58
8HP76GA8HP76ZS58
8HP75ZGA8HP75ZB57
8HP51ZGA8HP51ZB48, B46
8HP45ZGA8HP45XB47C20, B47D20
8HP45ZGA8HP45XN47

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Item number: ADM-SR20DET-8HP4575
  • Engine: Nissan SR20DET
  • Gearbox: BMW ZF 8HP45, 8HP50, 8HP51, 8HP70, 8HP75 and 8HP76 with large flat converter, 4 or 6 bolts (see table)
  • Flywheel: AlZnMg+Ti, approx. 3.95 kg, for direct connection to the 8HP converter, with built-in ring gear for the original Nissan CA18 starter motor
  • Torque: kit designed for engine torque of up to 2000 Nm
  • Adapter plate: AW7075-T651 aluminium, 24.5 mm thick
  • Included: adapter plate, flywheel, bolts for flywheel, adapter and gearbox
  • Manual: installation manual from Adamat

Fitting and delivery

The flywheel goes on the crankshaft of the SR20DET and takes the torque converter of the 8HP directly. The adapter plate connects the block to the gearbox housing. The ring gear fits the original Nissan CA18 starter motor; a starter motor is not included in the kit. Adamat supplies an installation manual with the kit.

When ordering, you choose whether the aluminium parts are anodised. Use the note field for the gearbox code of your 8HP, your chassis or a different engine tilt. Adamat makes the kit to order. The lead time is 5 to 7 weeks, with anodising approximately 2 weeks longer.

An SR20DET with a modern eight-speed automatic: the Adamat flywheel takes the 8HP converter directly and the kit is designed for up to 2000 Nm.

Why choose this SR20DET swap kit BMW 8HP?

An SR20DET mated to an 8HP calls for a flywheel that takes the converter directly and an adapter that connects the block and the gearbox. Adamat supplies both in one kit, with the bolts and a manual included. Because the flywheel is intended for heavy loads, the kit also suits a car with more hp than standard or a drag strip project.

Frequently asked questions

Which starter motor fits the SR20DET swap kit BMW 8HP?

The ring gear in the flywheel of the SR20DET swap kit BMW 8HP fits the original Nissan CA18 starter motor. A starter motor is not included in the kit.

Does the kit work with an 8HP with a 4-bolt or 6-bolt converter?

According to Adamat, the kit fits the 8HP versions with a large flat converter, with both 4 and 6 bolts. To be sure, enter the gearbox code of your 8HP in the note field.

What do I choose when ordering?

You choose whether the aluminium parts are anodised; this is done externally and takes approximately 2 weeks extra. In the note field you pass on your gearbox code, chassis, a different engine tilt or other requirements.

What is the lead time?

Adamat makes the kit to order, allow 5 to 7 weeks. With anodising, add approximately 2 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight12 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat Nissan SR20DET complete swap kit adapter + flywheel for BMW ZF 8HP45/50/70/75”
EN

Your Shopping cart

Close