Adamat GM LS/LSX/LSA/LQ/LT swap kit for ZF 8HP70 from Jaguar XJ X351 and Land Rover Discovery 4

€785,19 Incl. VAT

Adamat GM LS/LSX/LSA/LQ/LT swap kit for ZF 8HP70 from Jaguar XJ X351 and Land Rover Discovery 4

Complete swap kit to connect a GM LS, LSX, LSA, LQ or LT engine to the ZF 8HP70 from the Jaguar XJ X351 3.0, Jaguar 5.0 SVR or Land Rover Discovery 4. The set contains a billet AlZnMg+Ti flexplate with ring gear (approx. 3.7 kg, up to 2000 Nm), an adapter ring for the torque converter, a 35 mm AW7075-T651 adapter plate and the bolts. When ordering, you choose your engine (6, 8 or 9-bolt crankshaft) and optional anodising. Lead time 5 to 7 weeks, approx. 2 weeks longer with anodising.

Available on back-order|Estimated delivery time: 5 to 7 weeks

LS and LT engines have different crankshaft flanges. Choose your engine.

Optional anodised coating on the aluminium parts. This is done externally and adds about 2 weeks to the lead time.

For example your chassis, engine code, a different engine tilt or anything else Adamat should take into account.

SKU: ADM-313 Category: Brand:

Description

Adamat GM LS/LSX/LSA/LQ/LT swap kit for ZF 8HP70 from Jaguar XJ X351 and Land Rover Discovery 4

With this LS swap kit Jaguar 8HP70 from Adamat Performance, you mate a GM LS, LSX, LSA, LQ or LT engine to the ZF 8HP70 automatic from the Jaguar XJ X351 3.0, the Jaguar 5.0 SVR or the Land Rover Discovery 4 (LR1067). It is a complete adapter kit with a billet flexplate, an adapter plate and the bolts.

The flexplate is made in one piece from AlZnMg+Ti, a light alloy with the strength of 42CrMo4 steel, and is designed for up to 2000 Nm. It carries a 168-tooth ring gear for the original GM starter motor and the whole unit weighs approximately 3.7 kg. This means you no longer need the original GM automatic flexplate; according to Adamat, it often cracks above 600 Nm.

For centring the torque converter, an adapter ring is included that is pressed into the crankshaft of the LS. The adapter plate is 35 mm thick and made of AW7075-T651 Fortal aluminium.

Key advantages

  • GM LS or LT with the ZF 8HP70 from Jaguar or Land Rover
  • One-piece billet flexplate made of AlZnMg+Ti, designed for up to 2000 Nm
  • 168-tooth ring gear for the original GM starter motor, already fitted
  • Replaces the original GM flexplate, which according to Adamat often cracks above 600 Nm
  • Adapter ring for the torque converter guide, to be pressed into the crankshaft
  • 35 mm AW7075-T651 adapter plate in Fortal aluminium
  • 6, 8 or 9-bolt crankshaft: you choose your engine when ordering
  • Bolts for flexplate, adapter and gearbox included

Suitable for

Engine: GM LS and LT family

EngineCrankshaft
LS1, LS2, LS3, LS6, LS7, LQ4, LQ96 bolts
LSA, LT1, LT48 bolts
LS99 bolts

Gearbox: ZF 8HP70 from

  • Jaguar XJ X351 3.0
  • Jaguar 5.0 SVR
  • Land Rover Discovery 4 (LR1067)

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Item number: ADM_LS8HPSF_JAGXJ351
  • Engine: GM LS1, LS2, LS3, LS6, LS7, LQ4, LQ9 (6-bolt crankshaft), LSA, LT1, LT4 (8-bolt crankshaft) and LS9 (9-bolt crankshaft)
  • Gearbox: ZF 8HP70 from Jaguar XJ X351 3.0, Jaguar 5.0 SVR and Land Rover Discovery 4 (LR1067)
  • Flexplate: one-piece billet AlZnMg+Ti, approx. 3.7 kg, designed for up to 2000 Nm, with fitted 168-tooth ring gear for the original GM starter motor
  • Adapter ring: for guiding the torque converter, pressed into the crankshaft
  • Adapter plate: AW7075-T651 Fortal aluminium, 35 mm thick
  • Included: flexplate, adapter ring, adapter plate, bolts for flexplate, adapter and gearbox
  • Manual: according to Adamat, available soon

Fitting and delivery

You press the adapter ring into the crankshaft of the LS or LT; it centres the torque converter of the 8HP70. The billet flexplate goes on the crankshaft and the adapter plate between block and gearbox. The ring gear works with the original GM starter motor. According to Adamat, an installation manual will follow soon.

When ordering, you choose your engine, so that the flexplate fits your 6, 8 or 9-bolt crankshaft, and whether the aluminium parts are anodised. In the note field you can enter your chassis, engine code or other requirements. Adamat makes the kit to order. The lead time is 5 to 7 weeks, with anodising approximately 2 weeks longer.

An LS or LT up front and the 8HP70 from a Jaguar or Land Rover behind it, with a billet flexplate that can handle up to 2000 Nm.

Why choose this LS swap kit Jaguar 8HP70?

According to Adamat, the original GM flexplate is the weak point as soon as torque increases. This kit replaces it with a billet flexplate with ring gear and also supplies the adapter, the adapter ring and the bolts. This makes the set suitable for a car with more horsepower than standard in which the 8HP70 from a Jaguar or Land Rover has to go behind the engine.

Frequently asked questions

Which crankshaft version should I choose?

Choose 6 bolts for the LS1, LS2, LS3, LS6, LS7, LQ4 and LQ9, 8 bolts for the LSA, LT1 and LT4, and 9 bolts for the LS9. If in doubt, enter your engine code in the note field.

Do I still need the original GM flexplate?

No. The LS swap kit Jaguar 8HP70 has its own billet flexplate with a 168-tooth ring gear, which replaces the original GM automatic flexplate.

Which cars can the 8HP70 come from?

According to Adamat, from the Jaguar XJ X351 3.0, the Jaguar 5.0 SVR and the Land Rover Discovery 4 (LR1067).

What is the lead time?

Adamat makes the kit to order: allow 5 to 7 weeks. With anodising, add approximately 2 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight12 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat GM LS/LSX/LSA/LQ/LT swap kit for ZF 8HP70 from Jaguar XJ X351 and Land Rover Discovery 4”
EN

Your Shopping cart

Close